Radiator 1969 Elan Plus@
3 posts
• Page 1 of 1
Just bought this Elan Plus2, it is an early Federal car. Is there a way I can tell if the radiator is original? It looks it's age, and the buckets look about right with two 1/4in bolts top and bottom to secure brackets to rad. The brackets are also tapered at the bottom. Thanks
- JeffP
- First Gear
- Posts: 35
- Joined: 24 Jun 2021
I have two radiators for my +2 project. Both the same. There are no tapped holes just flat brackets.
Chris
Chris
67 Elan Super Safety
67 Elan +2
67 Elan +2
- seniorchristo
- Fourth Gear
- Posts: 590
- Joined: 19 Dec 2013
There was also a narrow radiator used that has separate brackets, tapered as you describe. Both are fairly well shown in the parts manual in Section KA -- Cooling. https://lotuselan.net/wiki/KA_-_Cooling_%2B2
I had the way too small version in my car. It has the 1/4" tapped holes in the radiator to attach the brackets. Yours is most likely original. Post a photo if you can.
I had the way too small version in my car. It has the 1/4" tapped holes in the radiator to attach the brackets. Yours is most likely original. Post a photo if you can.
Bud
1970 +2S Fed 0053N
"Winnemucca - says it all really!!"
1970 +2S Fed 0053N
"Winnemucca - says it all really!!"
- Bud English
- Fourth Gear
- Posts: 941
- Joined: 05 Nov 2011
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 42 guests