Ignition warning light
32 posts
• Page 3 of 3 • 1, 2, 3
Thanks John,
I found this : http://www.rimmerbros.co.uk/Item--i-UKC4187 which I may try as I already have BA7 bulbs and it seems the only place I can find 12V 2W capless is online, which is ridiculous!
At least I have a couple of options now.
Cheers
Robbie
I found this : http://www.rimmerbros.co.uk/Item--i-UKC4187 which I may try as I already have BA7 bulbs and it seems the only place I can find 12V 2W capless is online, which is ridiculous!
At least I have a couple of options now.
Cheers
Robbie
-
Robbie693 - Coveted Fifth Gear
- Posts: 1638
- Joined: 08 Oct 2003
All done and now the light goes out when it should. Hurrah! Although I did have a vain hope that it would improve my charging at idle but no joy on that one.
The bulb connector mentioned above was no use - it was for capless bulbs despite the product description saying otherwise. So I had to source some 2W capless which was surprising hard; the common rating is 1.2W which is for most dash light applications.
Thanks to all for the help and Merry Christmas!
Cheers
Robbie
The bulb connector mentioned above was no use - it was for capless bulbs despite the product description saying otherwise. So I had to source some 2W capless which was surprising hard; the common rating is 1.2W which is for most dash light applications.
Thanks to all for the help and Merry Christmas!
Cheers
Robbie
-
Robbie693 - Coveted Fifth Gear
- Posts: 1638
- Joined: 08 Oct 2003
32 posts
• Page 3 of 3 • 1, 2, 3
Total Online:
Users browsing this forum: No registered users and 43 guests