Safety wire knock off spinners?
16 posts
• Page 2 of 2 • 1, 2
Post by: 1owner69Elan » Mon Sep 10, 2018 5:20 pm
TTR, from whom I obtained by 26R hubs/spinners, did not use safety wiring on his spinners over a 16 year career of racing a 26R. Never had a wheel loosen. But, maintained "surgical cleanliness" on the wheel/spinner mating surface as well as spinner/hub threads. Plus, hammered up the spinners tight.
TTR acknowledges that "safety wiring" is of current fashion but not part of his experience. Leaves it to you to make the choice.
TTR acknowledges that "safety wiring" is of current fashion but not part of his experience. Leaves it to you to make the choice.
'69 Elan S4 SE
Street 181 BHP
Original owner
Street 181 BHP
Original owner
- 1owner69Elan
- Fourth Gear
- Posts: 846
- Joined: 16 Jun 2015
16 posts
• Page 2 of 2 • 1, 2
Total Online:
Users browsing this forum: No registered users and 16 guests
Site map
SitemapIndex
RSS Feed