knock offs or center bolts
6 posts
• Page 1 of 1
I have the smaller version, 9 inches long with 2.75 across the flats. Can send a picture if you wish. Please respond directly to me: mikeostrov"at" webtv.net.
Cheers. Mike, in Richmond, CA, near SF.
Cheers. Mike, in Richmond, CA, near SF.
[email protected] or (5l0) 232-7764
- Mike Ostrov
- Second Gear
- Posts: 89
- Joined: 20 Sep 2003
Required torque is 180-200 lbs/ft.
Here is a great tool from RD Ent. - Look under Tools
https://www.rdent.com/
Here is a great tool from RD Ent. - Look under Tools
https://www.rdent.com/
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1284
- Joined: 26 Sep 2003
Isn't Detroit "Rock City", though I would think of it more as "Motown" which incorporates both vehicle and music (sort of?)
OTC makes a octagon socket, 1905. Cheap enough, carry a breaker bar, or weld a bar on!
I have used brass plumbing strapping, to take up the 1/16 inch slack
P.S. the white sands beaches (Pinery), same latitude as N California are some of my favourite places on the earth.
P.P.S. Thank You for the bumper!
OTC makes a octagon socket, 1905. Cheap enough, carry a breaker bar, or weld a bar on!
I have used brass plumbing strapping, to take up the 1/16 inch slack
P.S. the white sands beaches (Pinery), same latitude as N California are some of my favourite places on the earth.
P.P.S. Thank You for the bumper!
Born, and brought home from the hospital (no seat belt (wtf)) in a baby!
Find out where the limits are, and start from there
Love your Mother
Earth
Find out where the limits are, and start from there
Love your Mother
Earth
-
h20hamelan - Coveted Fifth Gear
- Posts: 1949
- Joined: 25 Sep 2010
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 13 guests