Tyres 185/60 R14

PostPost by: NYK » Thu Jan 25, 2018 3:44 pm

Hi, I?m restoring my Plus 2, still a long way to go but have seen some wheels/tyres for sale, price might be OK. However they are 185/60 R14, from a brief forum search I?m gathering that these may not be a good idea. Any comments?
Nic
NYK
Third Gear
Third Gear
 
Posts: 417
Joined: 27 Jul 2017

PostPost by: msd1107 » Thu Jan 25, 2018 7:47 pm

1875/60-14 has almost the same rev/mile figure (915) as the S4 Elan 155-13 (912). It is thus slightly smaller than the standard 165-13 (887) (96.94%) on a +2.

David
1968 36/7988
User avatar
msd1107
Fourth Gear
Fourth Gear
 
Posts: 765
Joined: 24 Sep 2003

PostPost by: NYK » Thu Jan 25, 2018 7:51 pm

Thanks David, I also read that the extra width, 12% I think, resulted in poor handling particularly at the front end. I wonder if anyone has experience of this.
NYK
Third Gear
Third Gear
 
Posts: 417
Joined: 27 Jul 2017

PostPost by: msd1107 » Thu Jan 25, 2018 9:51 pm

Rather doubtful.

In years previous, I have run both 185/70-13 and 185/60-13 in addition to 165-13 on my S4 Elan and felt the handling improved. I used 27/32 tire pressures and the handling felt more precise and sensitive.

Others may have different ideas.

David
1968 36/7988
User avatar
msd1107
Fourth Gear
Fourth Gear
 
Posts: 765
Joined: 24 Sep 2003

PostPost by: rgh0 » Thu Jan 25, 2018 10:22 pm

You may find a problem with them hitting the front of the wheel well in certain circumstances of lock and wheel travel
cheers
Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8409
Joined: 22 Sep 2003

PostPost by: msd1107 » Thu Jan 25, 2018 10:29 pm

Not only that, but interference with rear springs and the inner rear wheel well.

Many people run small diameter rear springs. And, I had to carefully take away material in the inside of the fender well to keep the tires from interfering.

But, all cars are different. Some may have no problem. Others may have a problem on only one side. Still others cannot make it happen.
User avatar
msd1107
Fourth Gear
Fourth Gear
 
Posts: 765
Joined: 24 Sep 2003

PostPost by: NYK » Thu Jan 25, 2018 10:33 pm

Hmmn, having read these replies and spent the last hour or so trawling the forum, I think I?ll just stick with the standard Lotus alloys. Thanks all for comments
NYK
Third Gear
Third Gear
 
Posts: 417
Joined: 27 Jul 2017

Total Online:

Users browsing this forum: No registered users and 12 guests