Refinish aluminum wheels w/oven cleaner

PostPost by: tmrlotus+2 » Mon May 05, 2014 2:06 am

Has anyone refinished their aluminum wheels with oven cleaner on this board (see attached link)? I'm thinking about trying it on my Revolutions wheels. Thanks in advance.

http://www.924.org/techsection/wheel_refinishing.htm

Regards,
Mike
tmrlotus+2
First Gear
First Gear
 
Posts: 40
Joined: 20 Jul 2013

PostPost by: prezoom » Mon May 05, 2014 4:36 am

I used oven cleaner to clean up an aluminum cased transmission. I figured if I screwed up, I could paint it. Actually, it worked great. The cleaner removed all the grime, old paint, dirt and corrosion, leaving a very shinny case. I did this a couple of years ago and the case still looks great, though a bit dusty. Never tired it on aluminum wheels. It did not seem to pit the aluminum, so I would guess it would not hurt the machine finished portion of the wheels. But, I would try it on the inside of the wheel on a very small area first. Years ago, I used Revolution wheels on a race car, but never tried to clean them with oven cleaner, just brake cleaner.
YMMV.

Rob Walker
26-4889
Rob Walker
26-4889
50-0315N
1964 Sabra GT
1964 Elva Mk4T Coupe (awaiting restoration)
1965 Ford Falcon Ranchero, 302,AOD,9",rack and pinion,disc,etc,etc,etc
1954 Nash Healey LeMans Coupe

Owning a Lotus will get you off the couch
prezoom
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1195
Joined: 16 Mar 2009

PostPost by: tmrlotus+2 » Sat May 10, 2014 3:02 pm

prezoom wrote:I used oven cleaner to clean up an aluminum cased transmission. I figured if I screwed up, I could paint it. Actually, it worked great. The cleaner removed all the grime, old paint, dirt and corrosion, leaving a very shinny case. I did this a couple of years ago and the case still looks great, though a bit dusty. Never tired it on aluminum wheels. It did not seem to pit the aluminum, so I would guess it would not hurt the machine finished portion of the wheels. But, I would try it on the inside of the wheel on a very small area first. Years ago, I used Revolution wheels on a race car, but never tried to clean them with oven cleaner, just brake cleaner.
YMMV.

Rob Walker
26-4889

Thanks Rob, I appreciate the feedback. I'll let you know if I have the courage to try it!

Mike
tmrlotus+2
First Gear
First Gear
 
Posts: 40
Joined: 20 Jul 2013

PostPost by: Pete Shepherd » Thu Jul 03, 2014 3:50 pm

I use oven cleaner to strip paint from my plastic model kits and slot cars I restore. To this date it has never touched the plastic but is brilliant at getting old Humbrol paint off! I'd be surprised if it touched the Aluminium.

Good luck,

Pete
Pete Shepherd
New-tral
 
Posts: 14
Joined: 12 May 2007

Total Online:

Users browsing this forum: No registered users and 26 guests