Tony Thompson 26R steering wheels
32 posts
• Page 1 of 3 • 1, 2, 3
Looking at buying one, does anyone have a photo of these they can post?
Has anyone fitted one and if so any issues I should know of (horn?) much appreciated.
Available in red or black, unsure which I will go for but from what I have heard they are the business.
cheers
Has anyone fitted one and if so any issues I should know of (horn?) much appreciated.
Available in red or black, unsure which I will go for but from what I have heard they are the business.
cheers
- gordont
- Fourth Gear
- Posts: 503
- Joined: 11 Jun 2007
Gordon,
My wife bought me one for my +2 conversion, it's a lovely item, however, that car's a long way off complete so I have yet to fit it. It looks as though there should be no problem.
Mike.
My wife bought me one for my +2 conversion, it's a lovely item, however, that car's a long way off complete so I have yet to fit it. It looks as though there should be no problem.
Mike.
- mikealdren
- Coveted Fifth Gear
- Posts: 1194
- Joined: 26 Aug 2006
I have a photo, but it was sent to me by Stuart at TTR. I'll try to attach it, but if I fail, I'll try to PM you. They look great in the flesh (I've seen them at the shows), and I was sorely tempted when I couldn't find an original wheel for mine... Not sure whether they take a regular horn push, though, but I assume so.
1965 Elan S2
1972 Elan +2S 130
1972 Elan +2S 130
- ElanSeries2
- Second Gear
- Posts: 81
- Joined: 06 Nov 2007
Also sold by RD Enterprises in the US - there is a photo at the website rdent.com, under "Elan Parts." (Might be the same photo.) It does take the standard horn push (also available from Ray). I want one!
Andrew Bodge
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
-
RotoFlexible - Fourth Gear
- Posts: 624
- Joined: 01 Sep 2005
Sorry Peter , No .
I am actually searching for another center cap for it , and then have it on the wall . It will stay with KDH 2D alias "Old English White" as many other memories.
Hope you understand,
Regards,
Christian.
I am actually searching for another center cap for it , and then have it on the wall . It will stay with KDH 2D alias "Old English White" as many other memories.
Hope you understand,
Regards,
Christian.
-
Old English White - Fourth Gear
- Posts: 585
- Joined: 12 Dec 2005
Not talking of that wheel, but the orginal that came with my car.
I found that I could not drive with the sun behind me with the original polished aluminium centre & spokes because they reflected back into my eyes, so I had to paint them with black crackle paint.
So I advise getting a black one unless your car is just for show.
I found that I could not drive with the sun behind me with the original polished aluminium centre & spokes because they reflected back into my eyes, so I had to paint them with black crackle paint.
So I advise getting a black one unless your car is just for show.
Bill Williams
36/6725 S3 Coupe OGU108E Yellow over Black.
36/6725 S3 Coupe OGU108E Yellow over Black.
- billwill
- Coveted Fifth Gear
- Posts: 4405
- Joined: 19 Apr 2008
So I advise getting a black one unless your car is just for show.
"Black" refers to the leather, not the spokes. Both the red and black rim models have polished spokes, I believe. Good point about the sun.
The original wheel on my S3 is 14-3/4" outside diameter. The racing-style, fat-rim wheel I used autocrossing is 12" OD. I found it very touchy for everyday use (esp. on the highway) and went back to the original.
The TTR wheel is 13" OD (I asked Ray to measure it) so it is slightly closer in size to my touchy racing-style wheel than to the original.
Andrew Bodge
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
-
RotoFlexible - Fourth Gear
- Posts: 624
- Joined: 01 Sep 2005
2check that list (page #8 ) , or before buy new eyes...!
Christian.
Christian.
-
Old English White - Fourth Gear
- Posts: 585
- Joined: 12 Dec 2005
RotoFlexible wrote:So I advise getting a black one unless your car is just for show.
"Black" refers to the leather, not the spokes. Both the red and black rim models have polished spokes, I believe. Good point about the sun.
The original wheel on my S3 is 14-3/4" outside diameter. The racing-style, fat-rim wheel I used autocrossing is 12" OD. I found it very touchy for everyday use (esp. on the highway) and went back to the original.
The TTR wheel is 13" OD (I asked Ray to measure it) so it is slightly closer in size to my touchy racing-style wheel than to the original.
Maybe because mine is few years old, it has matte finish aluminum spokes.
Mike
- elancoupe
- Fourth Gear
- Posts: 759
- Joined: 11 Sep 2003
What diameter are these things? Looks a bit larger than my wooden Motolita. My last Elan (68 S4SE, sold about '76) had one of those crappy plastic Colin Chapman wheels; I threw it in a skip and fitted a little Lotus F3 red leather job, superb (apart from parking).
Wish I had a wheel signed by the Elan's designer, instead of just a plaque on my dashboard. Thanks Ron, btw.
Wish I had a wheel signed by the Elan's designer, instead of just a plaque on my dashboard. Thanks Ron, btw.
-
elansprint71 - Coveted Fifth Gear
- Posts: 2624
- Joined: 16 Sep 2003
elansprint71 wrote:What diameter are these things? Looks a bit larger than my wooden Motolita.
Look up the thread just a bit...
Andrew Bodge
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
'66 Elan S2 26/4869
I love the sound of a torque wrench in the morning. Sounds like... progress.
-
RotoFlexible - Fourth Gear
- Posts: 624
- Joined: 01 Sep 2005
32 posts
• Page 1 of 3 • 1, 2, 3