Steering column bracket to dashboard

Post by: **AussieJohn** » Sat Dec 17, 2011 10:30 am

A friend is rebuilding an S4 and has a query. The bracket [which is held to the dash with 3 bolts] is not flat across the surface that meets the dash; where the top large bolt fits the bracket appears to need a spacer of about 2 mill. Is there another bracket or spacer missing, cheers, John.

Post by: **types26/36** » Sat Dec 17, 2011 11:11 am

AJ,
While not specifically answering your question this thread may be of interest.
elan-f14/dash-mounting-question-t23253.html

Post by: **garyeanderson** » Sat Dec 17, 2011 11:14 am

I think they are all like that, never seen a washer/plate inserted. Maybe the design thought was that the bracket would be mounted/sandwiched. The bracket and dashboard as bread and the fiberglass as the meat . I don't know.

Post by: **AussieJohn** » Sat Dec 17, 2011 1:16 pm

Thanks guys, is the cast bracket a Lotus part or maybe Triumph?

Post by: **ardee_selby** » Sat Dec 17, 2011 1:34 pm

AussieJohn wrote: Thanks guys, is the cast bracket a Lotus part or maybe Triumph?

I believe it's a Lotus part...(sourced from where the door hinge castings came from p'raps?)

At least I can't see it on here:

http://www.rimmerbros.co.uk/Item--i-GRID005792
http://www.rimmerbros.co.uk/Item--i-GRID005790

Cheers - Richard

Post by: **garyeanderson** » Sat Dec 17, 2011 2:04 pm

I too think Lotus, i have had a couple GT6 and the column clamp was different. there are no identifying marks or trade marks, just a nicely die cast part

Gary

Post by: **rodlittle** » Sat Dec 17, 2011 2:55 pm

Im just about to fit my dash and I must admit it seemed to me as if the fibreglass should go between the bracket and the dash at the top
rod

Post by: **types26/36** » Sat Dec 17, 2011 3:41 pm

rodlittle wrote:it seemed to me as if the fibreglass should go between the bracket and the dash at the top

It did not appear to originally on my S3 .....well there was no hole, but the new dash had been fitted badly and when I got everything in line the fibre glass half went accross the mounting.

Post by: **rodlittle** » Sat Dec 17, 2011 4:03 pm

Mines a very early S1 so who knows, Ive hqd to make a new crash pad anyway but it looked as if the old one was trapped by the clamp/dash
rod

Post by: **garyeanderson** » Sat Dec 17, 2011 4:37 pm

elan-f14/wiring-loom-where-does-run-behind-the-dash-t19423.html

the above link has some photos of 26/4997 (LHD) when it was disassembled 15 years ago. specifically the removal of the dash.

26/4020 body also LHD

LHD body 4275

This is an S4 LHD coupe (bitsa) 36/9686 without any hint of the fiberglass mounting tabs, by this time the dashed had the crush bushes and threaded bobbins for the dashboard 5/16 unc screws bonded into the body.

Look in the upper right, I even reassembled it with the fiberglass as the meat between the dashboard and bracket

funny how it sometimes works out...

A more better picture

Post by: **AussieJohn** » Sat Dec 17, 2011 5:21 pm

Thanks for the photos Gary, maybe early cars had a tab which was deleted later, cheers, John.

Post by: **mgourwcg** » Sat Dec 17, 2011 6:10 pm

Hi

Fitted a new dash to mine no tab and no fibre 'meat'. For once all lined up and bolts went in no trouble.

Now door rods and clips and things are a total pain

Michael

Lotus Elan Sprint ( just need the windscreen fitted and 'finished')

Steering column bracket to dashboard

Total Online:

Recent Forum Topics

Support LotusElan.net!

Recent Wiki Articles