Steering rack

PostPost by: Petter Hval » Tue Feb 03, 2009 6:15 pm

Hi!
Can someone tell me where I can get shims for the inner track
rod ball joints? Sue Miller and P.M. don`t do them, and I can`t
find them in Rimmer`s Spitfire parts catalogue either.
Regards
Petter
Petter Hval
Second Gear
Second Gear
 
Posts: 51
Joined: 09 Apr 2004

PostPost by: CBUEB1771 » Tue Feb 03, 2009 7:29 pm

Dave Bean Engineering (http://www.davebean.com/) lists these shims in .002" and .010" thicknesses in his catalogue. Moss Motors (http://www.mossmotors.com/) also lists them in the same thicknesses but for the Spitfire MkIV, not sure if they would be the same. I have no idea what either may actually have on the shelf. These would be fairly easy to duplicate from shim stock.
Russ Newton
Elan +2S (1971)
Elite S2 (1962)
User avatar
CBUEB1771
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1545
Joined: 09 Nov 2006

PostPost by: mark030358 » Thu Feb 05, 2009 9:43 am

chic doig in Scotland has them. 2 and 10 thou.

cheers
Mark
User avatar
mark030358
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1172
Joined: 29 May 2004

PostPost by: jkatthehelm » Thu Feb 05, 2009 10:01 am

66 Elan fhc, 72 Elan Plus 2S 130/5, 98 Elise 2.0l Duratec
_____________________________________
Which way up should this be???
jkatthehelm
Second Gear
Second Gear
 
Posts: 121
Joined: 04 Apr 2006

PostPost by: jkatthehelm » Thu Feb 05, 2009 10:02 am

66 Elan fhc, 72 Elan Plus 2S 130/5, 98 Elise 2.0l Duratec
_____________________________________
Which way up should this be???
jkatthehelm
Second Gear
Second Gear
 
Posts: 121
Joined: 04 Apr 2006

PostPost by: gerrym » Sat Feb 07, 2009 9:29 am

For the Triumph steering rack, I've measured the inner track rod shims as 26mmOD, 17mmID. My shim pack thickness was 0.62mm (approx 24 thou) total.

Note, in case anyone has trouble obtaining these, ondrives has precison shims 25mm OD / 18mm ID.

Would probably work OK.

Regards

Gerry
gerrym
Fourth Gear
Fourth Gear
 
Posts: 882
Joined: 25 Jun 2006

PostPost by: Petter Hval » Sat Feb 07, 2009 9:46 pm

Hi.
Thanks for the information.
Moss Europe, London, have the .002" shims but the .010"
shims are out of stock, so I had to order another 5 of the .002".
Petter.
Petter Hval
Second Gear
Second Gear
 
Posts: 51
Joined: 09 Apr 2004

Total Online:

Users browsing this forum: No registered users and 18 guests