steering shaft installation

[rdssdi]

I am now installing the steering column and shaft.

Where is the turn indicator canceling cam on the shaft located when wheels are straight and wheel centered? I beleive it is at the "9 o'clock" position pointing to the indicator switch.

Bob

[Frank Howard]

Bob,

It will fit at 3:00 or 9:00 but 9:00 is correct.

[Rob_LaMoreaux]

The cancel bump points to the indicator switch. On my Just 2 this is 3:00 since the indicator is on the right hand side. On other cars the indicator may be on the left hand side in which case the bump will be at 9:00.

Rob

[rdssdi]

Thanks.

My switch ius located on the left. I assume it is position counter to the side that the shifter is on or the same side as the driver. As my car is LHD the switch is on the left. I will set the cam on the left at 9:00 o'clock position.