Steering Rack
7 posts
• Page 1 of 1
Mine kick over a bit with original rubber bushes but they seem to clamp the rack OK. I haven't tried polys
John
John
John
No longer active on here, I value my privacy.
No longer active on here, I value my privacy.
-
nebogipfel - Coveted Fifth Gear
- Posts: 1274
- Joined: 25 Sep 2003
Sorry, couldn't resist adding; have you seen your doctor about this!!!
"He's not the messiah, he's a very naughty boy"
Monty Python's The Life Of Brian,best film ever.
Monty Python's The Life Of Brian,best film ever.
- lotusanglia1965
- Second Gear
- Posts: 109
- Joined: 19 Jul 2004
If you put a little shim under it don't you alter the bump steer(steering rack height) setting?
John
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 4521
- Joined: 21 Sep 2003
Sorry, should have been more clear. The shims that control the rack height are already there but they aren't wide enough to go under the little 'claw arms' , so to speak, and the clamp seems to want to cock down where the claw arms are. I shimmed under the claw arms to keep the mount from cocking. Hope that helps.
Greg Z
45/0243K Sprint
45/7286 S3 SE DHC
45/0243K Sprint
45/7286 S3 SE DHC
-
gjz30075 - Coveted Fifth Gear
- Posts: 3026
- Joined: 12 Sep 2003
7 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 43 guests