Heater control mounting to Dashboard.

[john.houston]

Hi .Another question that probably requires a Photo .
After rewiring and re veneering the dash I came to a stop .I should have taken pics but now 10 yrs on I cant find anything in the strip down box that looks like it will secure the heater control to the inside of the dash.Its stopping the Dash going in permanently .
Any pics or advice would be great.
Thanks again John.

[billwill]

It's just a thin nut, as far as I recall. (on an S3).

[mbell]

Seems to be 4 short screws one each corner on my car.

[Bigbaldybloke]

Four short wood screws as already mentioned. Make sure they are not too long so they don?t go right through and damage the veneer.

[john.houston]

Thanks for the pictures ,they really do help. I expected larger brackets to deal with the force used to slide the 2 arms. I will go and check the box of bits .
Thanks again .