Cv drive shafts

PostPost by: thorbs000 » Wed Nov 06, 2013 10:26 am

Hi all

The re-build of my 68 +2 is slowly creeping along and am now considering cv drive shafts, probably sue millers.
My question is, I have refitted the aframe and hub and before I put in the new strut insert and Spring can I fit the cv drive shaft or do I have to fit it when rear suspension is fitted?
The body is off the chassis

Thanks
Ian
thorbs000
First Gear
First Gear
 
Posts: 37
Joined: 14 Mar 2013

PostPost by: 45bvtc » Wed Nov 06, 2013 11:20 am

You can fit the CV drive shafts before or after - when complete with body on, even: no worries.

Making up 2-guide studs like so will help enormously to locate the flanges to the spiders:
Attachments
P1000668.JPG and
45bvtc
Second Gear
Second Gear
 
Posts: 76
Joined: 27 Mar 2009

PostPost by: RichardHawkins » Thu Nov 07, 2013 8:51 pm

Ian,

I thought I could do this mod myself, and I have, but it was more difficult than I thought. In the end it would have been cheaper to have bought from Sue. Since then I have heard various people speak of fitting problems, and one who reported premature wear of the drive shaft where the spline engages with the CV joint. My car is not yet in one piece, so I do not know if my own mod works properly.

If you want to discuss further please send me a PM and we could have a phone conversation.

Richard Hawkins
RichardHawkins
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1280
Joined: 05 Jul 2008

Total Online:

Users browsing this forum: No registered users and 12 guests