CV vs Donuts Poll

What do you use or intend to use in the future

Solid Driveshafts (No Donuts) as the Susan Miller / TTR / Dave Bean / Elantrikbits Conversion
62
61%
Solid Driveshafts (1 Donut) as the Spyder Conversion
9
9%
Do-nuts
26
25%
Cream-Buns
4
4%
Elastic bands - Large type as Daf Cars
1
1%
 
Total votes : 102

PostPost by: terryp » Sat Sep 18, 2010 7:55 am

Perhaps it was time ........
Last edited by terryp on Sat Sep 18, 2010 10:33 am, edited 3 times in total.
terryp
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1264
Joined: 29 Nov 2007

PostPost by: Robbie693 » Sat Sep 18, 2010 10:26 am

Hi Terry,

I was tempted to select cream buns as you didn't put TTR's uj shafts as an option..

Or by cv's do you mean all solid driveshafts?

Cheers, happily munching,

Robbie
User avatar
Robbie693
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1514
Joined: 08 Oct 2003

PostPost by: terryp » Sat Sep 18, 2010 10:33 am

Robbie
Updated , I think that's everyone?
It could be an interesting outcome
Not many votes for Donuts yet? Perhaps Cream Buns will be more than Donuts .......

Terry
terryp
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1264
Joined: 29 Nov 2007

PostPost by: Old English White » Sat Sep 18, 2010 1:26 pm

... You have my vote.
TTR's uj shafts on "OEW"...
Christian.
Image
User avatar
Old English White
Fourth Gear
Fourth Gear
 
Posts: 585
Joined: 12 Dec 2005

PostPost by: Gordon Sauer » Sat Sep 18, 2010 11:52 pm

Chapman chassis, Chapman donuts. Gordon Sauer
Gordon Sauer
Fourth Gear
Fourth Gear
 
Posts: 607
Joined: 20 Aug 2004

PostPost by: CBUEB1771 » Sun Sep 19, 2010 2:02 am

Gordon Sauer wrote:Chapman chassis, Chapman donuts. Gordon Sauer

What makes you think they are Chapman donuts? He didn't design them, they were catalog items. If he (rather than Ron Hickman or anyone else actually doing the design) chose them it was to deal with the rear axle length change in the cheapest way possible, i.e. no sliding splines in the drive shafts. If CV joints with plunge motion were as ubiquitous in 1960 as they are now I have little doubt that Chapman (or Hickman) would have gone that way. Donuts introduce a small but oscillating variation in the wheel spring rate as the vehicle moves, increasing with greater deflection from slight bump. I have to think that Chunky really didn't like that.
Russ Newton
Elan +2S (1971)
Elite S2 (1962)
User avatar
CBUEB1771
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1545
Joined: 09 Nov 2006

PostPost by: Gordon Sauer » Sun Sep 19, 2010 5:04 am

I'm just throwing down the usual "as it was" notion--you start changing any or all around then it's not his (Chapman). When I tell people the front end is only adjustable for toe-in they think that was cheap and don't buy the "if I let em adjust it they'll screw it up" but I wouldn't want al the adjustable arms now available--I can see all the track folks doing it but at some point it really stops being a Chapman Lotus--maybe a Spyder one and not what it was--just preference. Gordon Sauer
Gordon Sauer
Fourth Gear
Fourth Gear
 
Posts: 607
Joined: 20 Aug 2004

PostPost by: Gordon Sauer » Sun Sep 19, 2010 5:04 am

I'm just throwing down the usual "as it was" notion--you start changing any or all around then it's not his (Chapman). When I tell people the front end is only adjustable for toe-in they think that was cheap and don't buy the "if I let em adjust it they'll screw it up" but I wouldn't want al the adjustable arms now available--I can see all the track folks doing it but at some point it really stops being a Chapman Lotus--maybe a Spyder one and not what it was--just preference. Gordon Sauer
Gordon Sauer
Fourth Gear
Fourth Gear
 
Posts: 607
Joined: 20 Aug 2004

PostPost by: terryp » Sun Sep 19, 2010 12:44 pm

This must the most interesting poll ever. I thought it would be 50/50 but at the moment 77% are using or intend to use solid driveshafts in lieu of the "original" set up
More than that - 6% are actually baking and using cream buns!!!!!!!! thus saving money on do-nuts or solid driveshafts, whether they get very far is another question!
Terry
terryp
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1264
Joined: 29 Nov 2007

PostPost by: summerinmaine » Sun Sep 19, 2010 4:03 pm

Gordon Sauer wrote:I'm just throwing down the usual "as it was" notion--you start changing any or all around then it's not his (Chapman). When I tell people the front end is only adjustable for toe-in they think that was cheap and don't buy the "if I let em adjust it they'll screw it up" but I wouldn't want al the adjustable arms now available--I can see all the track folks doing it but at some point it really stops being a Chapman Lotus--maybe a Spyder one and not what it was--just preference. Gordon Sauer



I understand the philosophy you describe Gordon, but I just don't subscribe to it. The Elan was a masterful concept from brilliant designers. But like anything else, in transforming the concept into reality, decisions had to be made, compromises accepted, and everything had to be built to a price. That's just cold, hard reality. And Chapman wasn't a deity (gasp!!!!), just a better-than-average human. "He's a witch! Burn him!!!!!"

So when I find a piece that can be improved by resort to modern technology, or when I can afford to toss price considerations out the window (HA!), I never hesitate to make the move. Do you seriously think that CABC would have fitted those gawdawful Lucas starters if modern pre-engaged starters like the Nippondenso had been available for a similar price? I don't, or I'd begin to doubt his sanity. Does my having swapped for a better starter make my car less of an Elan, or more?

Obviously, we would meet in the middle somewhere. I don't think that CN's Evante was an Elan, nor did it pretend to be.
Jim

Temporarily Elan-less
User avatar
summerinmaine
Third Gear
Third Gear
 
Posts: 392
Joined: 22 Sep 2003

PostPost by: Old English White » Sun Sep 19, 2010 4:18 pm

Gordon Sauer wrote:Chapman chassis, Chapman donuts. Gordon Sauer

I really wish to , but had bad , short experience with new donuts badly vulcanised or that stay too long on shelf . With the new cams and their extra power/torque , it was time to forget about originality , specially thinking at my position in the car ... But the Chapman chassis still stand .
Christian.
Image
User avatar
Old English White
Fourth Gear
Fourth Gear
 
Posts: 585
Joined: 12 Dec 2005

PostPost by: andyelan » Sun Sep 19, 2010 4:20 pm

Hi Everyone

Just in case anyones interested in a bit of a history.

Given where Chapman was in the late '50 and early '60 it's hardly susprising that he would choose rubber donuts for the Elan as they were in common use on many British racing cars of that era when designers were doing everything they could to avoid the use of sliding joints to accomodated driveshaft plunge. When plunge wasn't a issue, as for example in the Elite and Europa (and for that matter the E Type Jaguar) then solid UJ joints were fine, but sliding joints were to be avoided if at all possible. Far from being cheap and nasty, donuts were actually a very reliable and elegant solution when engine hp was relativly low. Amongst the many cars which used rubber donuts, early GT40s had enormous ones in the drive line untill equally enormous CV joins replaced them on the later Mk2s. The Lambourghini Miura on the other hand had UJs sliding splines in the drive line and suffered terrible handling problems when they would locked up under hard acceleration, this was only cured on late S models when CV joints were adopted. As hp increased to the point where donuts were no longer able to cope with the torque, then CV joins started to take over around '69 '70. The JPS Lotus 72 and subsequent GP cars all used CV joints. There were many exceptions of course and the Lotus 49 for example used UJs and sliding joints and was an extreamly sucessfull car.

As far as which to fit on an Elan today, donuts or CVs, well it's each to his own, all I know is I've fitted a CV joint conversion, had no problems with it whatsoever and it's made a remarkable improvement to the way the car drives. I won't be going back to donuts and as I've said before, I'm "Mr Originality is Everything".

Andy
andyelan
Fourth Gear
Fourth Gear
 
Posts: 620
Joined: 28 Feb 2008

PostPost by: hatman » Mon Sep 20, 2010 8:35 am

terryp wrote: - 6% are actually baking and using cream buns!!!!!!!! thus saving money on do-nuts or solid driveshafts


But aren't they worried that, as consumable items, they're not covered by the warranty? 8)
hatman
Third Gear
Third Gear
 
Posts: 366
Joined: 05 Oct 2004

PostPost by: terryp » Mon Sep 20, 2010 9:20 am

But what side would the cream go?

I'm still surprised at the amount of Non do-nut cars ........
terryp
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1264
Joined: 29 Nov 2007

PostPost by: peterako » Mon Sep 20, 2010 10:05 am

As I'm using Mick Miller CV's at the moment thought I'd give the Cream Buns a try in the future....though I'm pretty sure I'll be back to CV's pretty quickly :D
I is an Inginear....please excuse my speeling!
'73 +2S 130/5
Scimitar GTE for the lazy days, 3008, Some bicycles, Wife, Kids, Cats, Dogs....chickens....cluck cluck...one duck...the others flew away!
User avatar
peterako
Fourth Gear
Fourth Gear
 
Posts: 681
Joined: 02 Mar 2006
Next

Total Online:

Users browsing this forum: No registered users and 14 guests