clutch plate thickness
5 posts
• Page 1 of 1
The minimum would be just before it's down to the rivets,then It'll start to score the flywheel and pressure plate,or when it starts to slip.
John
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 4521
- Joined: 21 Sep 2003
Recently asked this question for my 5 Speed box that has a different clutch plate to the 4 speed. Mine is 7.75mm, one kind person said his new clutch was 7.85mm.
I am not sure if there is much difference between the thickness of the 4 and 5 speed clutch plates. I wouldn't expect much but the clutch is one of the while your in there jobs unless it really is almost new (like mine)
I am not sure if there is much difference between the thickness of the 4 and 5 speed clutch plates. I wouldn't expect much but the clutch is one of the while your in there jobs unless it really is almost new (like mine)
'73 +2 130/5 RHD, now on the road and very slowly rolling though a "restoration"
- mbell
- Coveted Fifth Gear
- Posts: 2640
- Joined: 07 Jun 2013
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 24 guests