Clutch hydraulic pipe position.
3 posts
• Page 1 of 1
Post by: john.houston » Sun Sep 01, 2013 5:14 pm
Just putting stuff back on my 69 +2 (rhd) restoration and I would be very grateful if anyone can post a pic or send one of the original position of the clutch and brake pipes . I cant see any holes in the bulkhead where they may have been clipped in position. Also my flexi pipe had a steel 90 degree bracket should this bolt to the bellhousing behind one of the bolts ?Once again a pic would help
. thanks John.
. thanks John.
- john.houston
- Second Gear
- Posts: 54
- Joined: 28 Jul 2006
Post by: billwill » Sun Sep 01, 2013 7:38 pm
This was asked recently, so there is a picture nearby. Which a search should find.
Last edited by billwill on Sun Sep 01, 2013 7:41 pm, edited 1 time in total.
Bill Williams
36/6725 S3 Coupe OGU108E Yellow over Black.
36/6725 S3 Coupe OGU108E Yellow over Black.
- billwill
- Coveted Fifth Gear
- Posts: 4405
- Joined: 19 Apr 2008
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 12 guests
Site map
SitemapIndex
RSS Feed