Clutch pedal travel on S3 elan
2 posts
• Page 1 of 1
Hi all,
just a quick question,
Can anyone give some guidance as to how much travel i should expect on a new clutch in my Elan?
when operating the clutch pedal the slave cylinder seems to have some travel, is this correct?
thanks
Gazza
just a quick question,
Can anyone give some guidance as to how much travel i should expect on a new clutch in my Elan?
when operating the clutch pedal the slave cylinder seems to have some travel, is this correct?
thanks
Gazza
- gazzamuffin
- Second Gear
- Posts: 70
- Joined: 08 Oct 2011
Set the pushrod to the clearance spec given in the manual.
On my S3 rebuild, I set it as shown in the diagram in the manual and there was too much travel.
So I set the clearance to the spec. Ignoring the diagram and it works fine - I don't think they meant the datum that they drew!
On my S3 rebuild, I set it as shown in the diagram in the manual and there was too much travel.
So I set the clearance to the spec. Ignoring the diagram and it works fine - I don't think they meant the datum that they drew!
- AHM
- Coveted Fifth Gear
- Posts: 1251
- Joined: 19 Apr 2004
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 1 guest