Coaxial clutch slave cylinder

[frearther]

I'm thinking about installing one of these to eliminate all the folderol with the stock clutch slave cylinder. Does anyone have experience with this?

[memnon]

I am in the process of fitting one to a Type 9 'box courtesy of QED. So far I have the adapter, and slave cylinder, I have measured it up and it looks either like a perfect fit, or if anything slighlt to long, so I may need to machine the adaptor down to suit.

I can report back in early May when I should have my car running if not finished.

[crannyr]

I have done two; one in our racer that we beat the crap out of for 3 years of racing and the other in my Plus 2 now with about 2500 miles. Both were Saab units with custom mountings. No problems at all...........................so far

good luck

[gjz30075]

Crannyr, how 'bout some details. What year(s) Saab? Any pics of the custom mounts.
Thanks,

GregZ

[frearther]

I think that RD has one here on the left side of the pond. Has anyone tried it?

[cabc26b]

I used one on my race car for years, no issues.

for sources here in North America -
dave bean sells them
tilton has kits
and i think the guys over at taylor race engineering should be able to kit up one as well

[jkolb]

I have one from Burton in the UK. Works well and was affordable.

Jerry

[bcmc33]

I have one from Burton in the UK. Works well and was affordable.

Jerry

Jerry,

Which Burton bits did you use?

I have provisional plans to do this job next winter, so the info will be good for future reference.