clutch fork D link

PostPost by: arthur67 » Wed Dec 16, 2015 2:54 pm

Hi having trouble with my clutch.When I took my engine out to overhaul it the D link was disconnected this explains why I was on the maximum adjustment.The D link seems a sloppy fit.
So what I would like is for someone to measure the distance between the ends of the fork as I might have to squeeze mine in a bit.
Kind regards Arthur
This forum would have useful when I had my first Lotus 40 years ago.!!!!
arthur67
First Gear
First Gear
 
Posts: 26
Joined: 21 Aug 2013

PostPost by: ricarbo » Thu Dec 17, 2015 12:34 pm

If you mean the distance between the ends of the D link, mine measures 29.65mm, or thereabouts. The distance between the two ends of the fork (release arm) very similar. Can't quite see how this alters the adjustment. the D link should be fixed on with two funny shaped wire clips.
regards
Richard
ricarbo
Third Gear
Third Gear
 
Posts: 264
Joined: 14 Apr 2010

PostPost by: arthur67 » Thu Dec 17, 2015 7:49 pm

Thanks for that info Richard just measured mine and it is 38 mm the D link was dangling from the fork by one spring the other one was in 3 pieces in the bell housing but the clutch still worked..I have 2 new springs to fit and probably a new D Link.
Thanks Arthur
arthur67
First Gear
First Gear
 
Posts: 26
Joined: 21 Aug 2013

Total Online:

Users browsing this forum: No registered users and 24 guests