How to detach body from the frame, s1
6 posts
• Page 1 of 1
I'm having trouble removing the body from the frame. Are there any exploded diagrams, pictures or videos available that show all the attachment points? I know I must have missed some.
Many thanks, Todd
Many thanks, Todd
- tburdeinei
- New-tral
- Posts: 2
- Joined: 05 Sep 2016
These may help you .....
http://www.lotuselan.net/wiki/Lotus_Bod ... Procedures
http://www.lotuselan.net/wiki/BA_-_Body_-_Attaching
http://www.lotuselan.net/wiki/Lotus_Bod ... Procedures
http://www.lotuselan.net/wiki/BA_-_Body_-_Attaching
Roger
S4 DHC
S4 DHC
- oldelanman
- Coveted Fifth Gear
- Posts: 1927
- Joined: 02 Jan 2008
tburdeinei wrote:I'm having trouble removing the body from the frame. Are there any exploded diagrams, pictures or videos available that show all the attachment points? I know I must have missed some.
Many thanks, Todd
Todd,
This video shows where the fixing points are in the chassis. May help you locate them.
https://youtu.be/Ar5ynxMKYU0
Paul
66 Elan S2
- PaulH
- Second Gear
- Posts: 130
- Joined: 08 Apr 2009
During one of my Elan rebuilds (S3), I found that in addition to the 16 normal attachment points, that the rearmost bolts for the inner front seat carpet protectors (bent sheetmetal under the seat side tubes) were drilled through the frame flanges near the inner seat belt attachment. When I went to lift the body with a two post lift, the entire chassis (no engine) was lifted by those two 1/4" bolts
Steve
Elan S1 1963-Bourne bodied
Elan S3 1967 FHC pre airflow
Formerly:
Elan S1 1964
Elan S3 1966 FHC pre airflow
Elan S3 1967 FHC airflow
Elan S4 1969 FHC
Europa S2 1970
Esprit S2 1979
Elan S1 1963-Bourne bodied
Elan S3 1967 FHC pre airflow
Formerly:
Elan S1 1964
Elan S3 1966 FHC pre airflow
Elan S3 1967 FHC airflow
Elan S4 1969 FHC
Europa S2 1970
Esprit S2 1979
- bitsobrits
- Third Gear
- Posts: 419
- Joined: 27 Apr 2011
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 14 guests