door window frames sprint (the devils in the detail)

[bloodknock]

Hi peeps,
I'm on the last lap, 100 yards out, and I've lost this part!
I believe its to supress vibration, it looks like hardboard, is it? I can see its length, BUT how thick is it?
Regards
Bob

[gjz30075]

Hard to tell in the picture but it looks like the remnants of the window fuzzies. Two are required for each
frame. They cushion the glass to prevent rattles.

[bloodknock]

Thanks for your reply Greg.
Both doors have the window fuzzy strips fitted correctly.
These are photos as I stripped the door frames. I have misplaced the fiberous ?spacers?
These were glued to the door frame, attached to the inner edge of the top of the door frame

Regards
Bob

[Craven]

It may have been used to ensure the ?fuzzy? window wipe/seal is in contact with the glass.
Frame has no support in this area and it tends to bow away from the glass. I fitted thin rubber foam, a sort of self-adjusting pressure point between the frame and door.
FWIW

[nigelrbfurness]

I use 3mm-4mm self-adhesive window felt for this. I use a lot of it in other restoration work too. It is quite firm but compressible. You can get it in reels on Amazon.

[bloodknock]

Great, thanks Nigel, i'm on to it.
Regards
Bob