Front Tower Cross Brace.
1 post
• Page 1 of 1
Here's something that will compliment the rear cross brace - A front tower cross brace - Something we did during the four year ground up rebuild of the S2 elan. Does it make a difference? I cant say 100% that it does, but a tower cross certainly triangulates the front of the chassis to ensure minimum flex - Every bit counts as they say.
Photos below show cross brace during rebuild-restoration at chassis stage, then two views deep into the front of the engine bay, it was a squeeze but everything fitted in perfectly.
This project is not suitable if the front chassis cross member is being used as a vacuum tank.
Photos below show cross brace during rebuild-restoration at chassis stage, then two views deep into the front of the engine bay, it was a squeeze but everything fitted in perfectly.
This project is not suitable if the front chassis cross member is being used as a vacuum tank.
Live your dream-wear your passion.
http://elantrikbits.com/lotus-elan-blog/
http://elantrikbits.com/lotus-elan-blog/
- ceejay
- Fourth Gear
- Posts: 558
- Joined: 27 Mar 2007
1 post
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 5 guests