S4 Spyder Seat Belts DHC
8 posts
• Page 1 of 1
Terry
If you go to the "Elan Forum Discussions" Page 2 from a couple of weeks ago, Message Title S4 Rebuild, I think it is the last but one Photo of my Spyder Seat Belt Brackets I would send you a better Photo but the Car has gone off for Painting now
If you go to the "Elan Forum Discussions" Page 2 from a couple of weeks ago, Message Title S4 Rebuild, I think it is the last but one Photo of my Spyder Seat Belt Brackets I would send you a better Photo but the Car has gone off for Painting now
PeterExpart
New Forest National Park
Hampshire UK
New Forest National Park
Hampshire UK
- peterexpart
- Second Gear
- Posts: 186
- Joined: 27 Nov 2012
Terry
The Two Bolts go thru from the Boot side with the Top Hat Spacers spacing the Bracket away from the Fiberglass the Two Belt Sliders go into the top Bolt Holes which would line up with the Slots in the Back Board and the Reels are bolted into the Bottom Bolt Holes nearest the floor, the two U shaped Brackets with the Nuts welded in are to extend the Static part of the Belt (where the Buckle is) in case you have the Seat in its forward position.
Hope that helps
The Two Bolts go thru from the Boot side with the Top Hat Spacers spacing the Bracket away from the Fiberglass the Two Belt Sliders go into the top Bolt Holes which would line up with the Slots in the Back Board and the Reels are bolted into the Bottom Bolt Holes nearest the floor, the two U shaped Brackets with the Nuts welded in are to extend the Static part of the Belt (where the Buckle is) in case you have the Seat in its forward position.
Hope that helps
PeterExpart
New Forest National Park
Hampshire UK
New Forest National Park
Hampshire UK
- peterexpart
- Second Gear
- Posts: 186
- Joined: 27 Nov 2012
8 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 16 guests