spike in +2 seat frame

PostPost by: vortz » Mon Oct 08, 2012 6:40 pm

can anybody tell me why i have a 10 inch spike, inserted into the rear of both my front seat frames.
i have owned the car 8 years, and only discovered these when i removed a seat to repair it, at the weekend.
thanks ian (puzzled)
vortz
First Gear
First Gear
 
Posts: 24
Joined: 05 Nov 2003

PostPost by: tcsoar » Tue Oct 09, 2012 11:35 am

Ian,

It is common for these seat frames to crack and break at the back of the frame, maybe these spikes were added to give the tubing some extra strength.

I can add that both of my seats had failed at this point and I inserted a turned down bolt to fit snuggly in the tube and welded them in place as well as the crack in the tube. :mrgreen:

Chris.
User avatar
tcsoar
Third Gear
Third Gear
 
Posts: 305
Joined: 01 May 2007

PostPost by: vortz » Sat Oct 13, 2012 6:54 pm

chris
thanks for the reply.
although it`s a good theory,I don`t think that is their purpose.
they slide quite easily in and out of the seat frame.
If I had to guess, I would say they are to line something up with something else.
they definitely don`t add lightness,so they can`t be OEM.
ian
vortz
First Gear
First Gear
 
Posts: 24
Joined: 05 Nov 2003

Total Online:

Users browsing this forum: No registered users and 14 guests