Chassis repair

PostPost by: saildrive2001 » Thu Sep 21, 2006 1:16 pm

I need to replace the front suspension mounting rods on my Elan chassis. I need to replace both the lower & upper ones ( in the turrets & the xmember) Has anyone experience of doing this repair? If so could you please give me your advice on the proceedure involed in making this repair.

Keith Marshall
Keith Marshall
69 S4 SE DHC RHD Original owner
saildrive2001
Fourth Gear
Fourth Gear
 
Posts: 554
Joined: 29 Oct 2003

PostPost by: rgh0 » Fri Sep 22, 2006 8:51 am

Keith

Section A5 of the Elan workshop manual gives a procedure for eplacemnt of the lower pins. I presume the upper pins can be replaced with a similar procedure.

regards
Rohan
User avatar
rgh0
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 8407
Joined: 22 Sep 2003

PostPost by: saildrive2001 » Sat Sep 23, 2006 2:21 pm

Rohan,
Thanks for the reply. You are right it is in the manual, I guess I didn't look closely enough at it.
Keith Marshall
69 S4 SE DHC RHD Original owner
saildrive2001
Fourth Gear
Fourth Gear
 
Posts: 554
Joined: 29 Oct 2003

Total Online:

Users browsing this forum: No registered users and 5 guests