bleeding and position of servo

[street]

Air, air and more air, any tips on bleeding servo, and what orientation it should be, air valve up or down etc.

thank you

[mark030358]

Hi,
You dont say +2 or not. Anyway the later Lockheed Servos should point upwards by all accounts (the thin bit); while the Girling, as on the 2 seater, I have only ever seen horizontal.

I had lots of issues and I was going to fit bleed nipples both before and after the servo, in the end I didnt need to, I just kept at it.

You have my sympathy, servo problems are a real pain.

cheers
Mark

[john.p.clegg]

So...

John