Master cylinder hard line
3 posts
• Page 1 of 1
Post by: lightwait26 » Thu Sep 02, 2021 12:27 pm
Looking to run a new brake pipe from the master to the 4 way on a single system RHD car. I don’t know what the correct routing might be, can anyone advise , or optimally, show a photo?
art
- lightwait26
- First Gear
- Posts: 28
- Joined: 05 Oct 2009
Post by: oldelanman » Sun Sep 05, 2021 10:51 am
lightwait26 wrote:Looking to run a new brake pipe from the master to the 4 way on a single system RHD car. I don’t know what the correct routing might be, can anyone advise , or optimally, show a photo?
Hi Art,
The Parts List shows the routing of the brake lines both with and without the servo which should give you some idea .....
https://lotuselan.net/wiki/JA_-_Brakes_-_Bundy_Pipes
Difficult to get clear photos but hopefully these show how I ran my pipes ... with a servo fitted.
Hope this helps.
Roger
S4 DHC
S4 DHC
- oldelanman
- Coveted Fifth Gear
- Posts: 1929
- Joined: 02 Jan 2008
Post by: Mazzini » Sun Sep 05, 2021 11:40 am
lightwait26 wrote:Looking to run a new brake pipe from the master to the 4 way on a single system RHD car. I don’t know what the correct routing might be, can anyone advise , or optimally, show a photo?
What series? Servo or non servo?
-
Mazzini - Coveted Fifth Gear
- Posts: 2048
- Joined: 11 Dec 2010
3 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 49 guests
Site map
SitemapIndex
RSS Feed