Early car brake line route

PostPost by: gjz30075 » Fri Nov 17, 2017 12:43 am

My brake line from the Master to the junction on my S3 is missing so can anyone show me, with some good pics, the route the brake line from the Master takes to get to the junction fitting on the other side of the frame? LHD car.
Greg Z
45/0243K Sprint
45/7286 S3 SE DHC
User avatar
gjz30075
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3026
Joined: 12 Sep 2003

PostPost by: S2Jay » Fri Nov 17, 2017 3:56 pm

Hi Greg,

Not sure what differences there may be from S2 to S3, but in case there may be similarities here are some pics I posted for my LHD S2 [now under refreshment]. These pics were taken before disassembly, but after M/C removed. More are here: https://www.flickr.com/gp/68999653@N07/eq6spG

Not sure if these are just what you need, but if I can help, let me know.
Attachments
p1150196.jpg and
p1190067.jpg and
p1190053.jpg and
p1190057.jpg and
just looking for clues at the scene....
S2Jay
Second Gear
Second Gear
 
Posts: 152
Joined: 21 Dec 2010

PostPost by: S2Jay » Fri Nov 17, 2017 4:53 pm

Finally found 1 pic that shows the connection @ the M/C. Not a v good pic, but in case it helps....
Attachments
p1000734.jpg and
just looking for clues at the scene....
S2Jay
Second Gear
Second Gear
 
Posts: 152
Joined: 21 Dec 2010

PostPost by: gjz30075 » Fri Nov 17, 2017 6:56 pm

Very good, Jay, thanks! I see your line from the Master goes straight over the clutch master, whereas some
other pics I've seen show the line taking a 180 down between the masters. Might be an S2 vs S3 thing.
Greg Z
45/0243K Sprint
45/7286 S3 SE DHC
User avatar
gjz30075
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 3026
Joined: 12 Sep 2003

Total Online:

Users browsing this forum: No registered users and 19 guests