Handbrake lever, Elan S3

PostPost by: John Larkin » Tue Feb 05, 2019 8:17 am

My handbrake lever handle was melted in a fire and is irreparable. The rest of the assembly is usable. Can anybody advise me where I can source a new or used handle or entire handbrake lever? I've tried the usual suppliers without luck.

I assume that the handbrake was sourced by Lotus from some other car manufacturer. Anybody know the source?

John Larkin.
1967 S3SE FHC, 1974 Rover P6B, 1949 Lancia Aprilia
John Larkin
Third Gear
Third Gear
 
Posts: 291
Joined: 13 Oct 2003

PostPost by: geni » Tue Feb 05, 2019 10:52 am

je dispose d'un de rechange si cela vous int?resse faite moi photo de l'objet (voirparts list du catalogue) et vous confirme ensuite en message priv?
geni
Third Gear
Third Gear
 
Posts: 230
Joined: 30 Dec 2014

PostPost by: geni » Tue Feb 05, 2019 10:55 am

I have this and if it may interest you, I am ready to sell it
geni
Third Gear
Third Gear
 
Posts: 230
Joined: 30 Dec 2014

PostPost by: Bombay Racing Green » Tue Feb 05, 2019 11:03 am

Mk 1 Cortina John. Needs to be modified. https://rover.ebay.com/rover/0/0/0?mpre ... 2944575600

How?s it going?

Regards,
Pete
1970 S4 DHC
1971 S2 Europa
1968 +2
Bombay Racing Green
Second Gear
Second Gear
 
Posts: 221
Joined: 05 Sep 2012

PostPost by: John Larkin » Tue Feb 05, 2019 2:53 pm

geni wrote:I have this and if it may interest you, I am ready to sell it


Private message sent.
1967 S3SE FHC, 1974 Rover P6B, 1949 Lancia Aprilia
John Larkin
Third Gear
Third Gear
 
Posts: 291
Joined: 13 Oct 2003

PostPost by: John Larkin » Tue Feb 05, 2019 2:58 pm

Bombay Racing Green wrote:Mk 1 Cortina John. Needs to be modified. https://rover.ebay.com/rover/0/0/0?mpre ... 2944575600

How?s it going?

Regards,


Hi Peter,

I saw that Ebay advertisement this morning, but I thought it too expensive. I hunting around at the moment, and I may yet buy it if I have no luck elsewhere.

The body shell is ready for the paintshop. Collected the balanced prop shaft this morning. Chassis clean up and painting next. Expect to have chassis rolling again in April.

Regards,

John.
Last edited by John Larkin on Tue Feb 05, 2019 6:25 pm, edited 1 time in total.
1967 S3SE FHC, 1974 Rover P6B, 1949 Lancia Aprilia
John Larkin
Third Gear
Third Gear
 
Posts: 291
Joined: 13 Oct 2003

PostPost by: billwill » Tue Feb 05, 2019 5:39 pm

If the metalwork of your handbrake is OK I expect you could make a new handle with that new rubber-putty stuff that sets like hard plastic.

I forgot its name for the moment.

...
Ah found it:

https://sugru.com/about
Bill Williams

36/6725 S3 Coupe OGU108E Yellow over Black.
billwill
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 4405
Joined: 19 Apr 2008

PostPost by: Elan45 » Tue Feb 05, 2019 6:07 pm

Because I too had a handbrake that had been a road fire and needed a replacement trigger or push-button, I traced that plastic part when I had my assembly apart. It would be a relatively easy part to make from 1/4inch plastic sheet. Do you need me to send you a copy of my tracing?
Roger
'67 Elan S3 SS DHC
'67 Elan FHC pre-airflow
'67 Elan S3 SE upgrade to 26R by Original owner
'58 Eleven S2 (ex-works)
'62 20/22 FJ (ex-Yamura)
'70 Elan +2S RHD
'61 20 FJ project
'76 Modus M1 F3
Elan45
Fourth Gear
Fourth Gear
 
Posts: 953
Joined: 23 Nov 2008

PostPost by: John Larkin » Tue Feb 05, 2019 6:28 pm

Elan45 wrote:Because I too had a handbrake that had been a road fire and needed a replacement trigger or push-button, I traced that plastic part when I had my assembly apart. It would be a relatively easy part to make from 1/4inch plastic sheet. Do you need me to send you a copy of my tracing?
Roger


Roger, I would very much appreciate a copy of your tracing. My email is jfllarkin "at" gmail.com

Regards,
John.
1967 S3SE FHC, 1974 Rover P6B, 1949 Lancia Aprilia
John Larkin
Third Gear
Third Gear
 
Posts: 291
Joined: 13 Oct 2003

PostPost by: SENC » Wed Feb 06, 2019 4:27 am

John, see Steve's post about 6 down in this thread - you might see if he has any more.

lotus-suspension-f42/hand-brake-lever-t41970.html#p296754
Henry
69 Elan S4
65 Seven S2
SENC
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1030
Joined: 30 Dec 2015

PostPost by: John Larkin » Wed Feb 06, 2019 9:19 am

SENC wrote:John, see Steve's post about 6 down in this thread - you might see if he has any more.

lotus-suspension-f42/hand-brake-lever-t41970.html#p296754


Dear SENC,

Thanks for that link. I've emailed Steve.

Regards,

John.
1967 S3SE FHC, 1974 Rover P6B, 1949 Lancia Aprilia
John Larkin
Third Gear
Third Gear
 
Posts: 291
Joined: 13 Oct 2003

PostPost by: knockoffnut » Wed Feb 06, 2019 1:16 pm

I have a spare Elan handbrake handle assembly, and would be willing to trade for an original Seven S2 handbrake lever assembly...
1963 Unicorn
1964 S1
1965 S2
1967 S3 SE DHC
Frankentwincam 26R
Seven S2 A
Seven S2 F
knockoffnut
Second Gear
Second Gear
 
Posts: 219
Joined: 02 Sep 2011

PostPost by: geni » Wed Feb 06, 2019 1:50 pm

a quoi ressemble celui-ci ?
j'ai aussi la poign?e chrom? mais je ne sait pour le mod?le
geni
Third Gear
Third Gear
 
Posts: 230
Joined: 30 Dec 2014

Total Online:

Users browsing this forum: No registered users and 6 guests