Brake hose seals?

Print view
Post a reply

PostPost by: PaulH » Sat Nov 24, 2018 7:00 pm

I'm not sure if there should be a washer/seal between the brake hoses and the brake calipers. I can't see anything obvious in the parts list. Can anyone confirm please?
wp_20181124_005.jpg and

wp_20181124_003.jpg and
66 Elan S2
PaulH
Second Gear
Second Gear
 
Posts: 130
Joined: 08 Apr 2009
Top

PostPost by: LaikaTheDog » Sat Nov 24, 2018 10:05 pm

Yes. A copper washer, usually comes in the hose kit.
User avatar
LaikaTheDog
Third Gear
Third Gear
 
Posts: 304
Joined: 29 Oct 2003
Top

PostPost by: nigelrbfurness » Tue Nov 27, 2018 9:35 am

For that angle of entry you should be using a banjo fitting if you are using the correct brake hoses.
1970 S4SE/1760cc big valve/SA-AX block, L2s, 45DCOEs, 1978 Jensen GT, 1962 AH Sprite, Alfa-Romeo 159, 1966 Bristol Bus, 1947 AEC Regal bus.
nigelrbfurness
Third Gear
Third Gear
 
Posts: 372
Joined: 04 Apr 2008
Top

PostPost by: Grizzly » Tue Nov 27, 2018 3:26 pm

As above, the original hoses had a brass end that converted the hose to a banjo fitting.
Chris
User avatar
Grizzly
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1857
Joined: 13 Jun 2010
Top

PostPost by: oldelanman » Tue Nov 27, 2018 4:30 pm

PaulH wrote:I'm not sure if there should be a washer/seal between the brake hoses and the brake calipers. I can't see anything obvious in the parts list. Can anyone confirm please?


The flexi pipes and end fittings are shown in Section JA of the Parts Manual - under Bundy Pipes. The Banjo fittings and copper washers are shown.
Roger
S4 DHC
oldelanman
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1927
Joined: 02 Jan 2008
Top
Post a reply
Return to Brakes
Unanswered Posts • Active Topics

Total Online:

Users browsing this forum: No registered users and 10 guests

Site map Site map • SitemapIndex SitemapIndex • RSS Feed RSS Feed • Channel list Channel list • FAQ • Delete all board cookies