Clevis pin size for brake & clutch push rods

[tjb0274]

Can anyone tell me the correct diameter(s) and lengths for the brake & clutch m/c clevis pins?

[oldelanman]

Clevis pin is 5/16" dia x 7/16" long (underside of head to edge of split pin hole) ...... or approx 8mm x 12mm

That's for the original pushrod with fixed clevis, if an adjustable clevis is fitted or the pedal has been drilled oversize to overcome wear then yours may be different.

[tjb0274]

Clevis pin is 5/16" dia x 7/16" long (underside of head to edge of split pin hole) ...... or approx 8mm x 12mm

That's for the original pushrod with fixed clevis, if an adjustable clevis is fitted or the pedal has been drilled oversize to overcome wear then yours may be different.

Awesome - thanks @oldelanman