Girling MK11B servo

PostPost by: Hawksfield » Wed Mar 19, 2014 4:51 pm

Hi all

I am looking for the spring loaded air valve from the above servo, there is two of them in the control valve chamber.
I was thinking someone may have an old unit that that is scrap or one that is surplus. I am willing to purchase either the valves or a servo that is non serviceable.

A point of interest I have just seen the original ABV automatic brake bleed valves on ebay for the early mini 3/8 UNFat ?4.99 for four these should fit the elan's. a decent buy :)
John

+2s130 1971
User avatar
Hawksfield
Fourth Gear
Fourth Gear
 
Posts: 611
Joined: 14 Jul 2004

PostPost by: Gordon Sauer » Wed Mar 19, 2014 6:10 pm

I was ordering some things from Paul Matty and asked him about one of the springs for that servo that I was missing, and he was able to get one through one of the rebuilders that he uses so that might be a possibility for you. Gordon Sauer
Gordon Sauer
Fourth Gear
Fourth Gear
 
Posts: 607
Joined: 20 Aug 2004

PostPost by: Elanintheforest » Wed Mar 19, 2014 10:46 pm

Try Classicar Automotive in Cheshire, who have rebuilt these servos for many years. Half of the servos they get to overhaul are scrap, so they keep any good bits for servos that can be done.

Mark
User avatar
Elanintheforest
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 2489
Joined: 04 Oct 2005

Total Online:

Users browsing this forum: No registered users and 17 guests