source for brake fluid reservoir?
8 posts
• Page 1 of 1
Pegasus Racing has some Girling reservoirs. Don't know if they have your particular model...
http://www.pegasusautoracing.com/group. ... CRESERVOIR
Gary
'71 Elan Sprint FHC
Miami, Florida
http://www.pegasusautoracing.com/group. ... CRESERVOIR
Gary
'71 Elan Sprint FHC
Miami, Florida
-
archigator - Third Gear
- Posts: 447
- Joined: 15 Sep 2003
Try Paul Matty in UK.
email: [email protected]
www.paulmattysportscars.co.uk
Umberto Ferrari
Elan sprint 1971
Modena - Italy
email: [email protected]
www.paulmattysportscars.co.uk
Umberto Ferrari
Elan sprint 1971
Modena - Italy
- umbyfer
- Second Gear
- Posts: 185
- Joined: 03 Apr 2004
Hi Andrew
Is this what you are looking for (See pic)?
If so it has a Girling logo and number 64473668 stamped on it.
Makka Pakka always wants to get into the photos, he is such a pain
Hope this helps
Jason
Is this what you are looking for (See pic)?
If so it has a Girling logo and number 64473668 stamped on it.
Makka Pakka always wants to get into the photos, he is such a pain
Hope this helps
Jason
50/0951 1968 Wedgewood blue +2, 1990 Mini Cooper RSP
-
Jason1 - Coveted Fifth Gear
- Posts: 1349
- Joined: 03 Nov 2005
If you are looking for the Girling dual cyl., Is it this one. Cyl. number is 64676597030, the reservoir is 64476296 and the cover is 64473687.
This is from a 1969 +2 Fed. car. I looked in a number of older part books (1965-1976), I could not find what else it goes to. I did not have a Girling parts books of that age.
Best of luck
Bill
This is from a 1969 +2 Fed. car. I looked in a number of older part books (1965-1976), I could not find what else it goes to. I did not have a Girling parts books of that age.
Best of luck
Bill
- nhhiker
- Second Gear
- Posts: 52
- Joined: 23 Dec 2006
Bill,
that looks like the unit. I'll have to go home to check the id numbers, but i think there are only two that look like that, the difference being the bores. Are you selling that one or just showing it to me for reference.
I dont think i made myself clear on my original post. My M/C was leaking and had a rusted out bore plus the reservoir was cracked, so i needed new, both, fast. I was hoping someone had a cross-reference number i could take down to the local napa and they could have one for me next day...
No such luck. Turns out these things are no longer made and there doesn't seem to be a modern replacement. I'll look into that at the local junk yard, but seems for now we have to get them sleeved and then drilled out for remote reservoirs.
Thanks everyone for their help.
that looks like the unit. I'll have to go home to check the id numbers, but i think there are only two that look like that, the difference being the bores. Are you selling that one or just showing it to me for reference.
I dont think i made myself clear on my original post. My M/C was leaking and had a rusted out bore plus the reservoir was cracked, so i needed new, both, fast. I was hoping someone had a cross-reference number i could take down to the local napa and they could have one for me next day...
No such luck. Turns out these things are no longer made and there doesn't seem to be a modern replacement. I'll look into that at the local junk yard, but seems for now we have to get them sleeved and then drilled out for remote reservoirs.
Thanks everyone for their help.
- mini64
- Second Gear
- Posts: 177
- Joined: 26 Aug 2005
- believe AP Racing deliver a modern replacement. Try "googeling them".
Dag
Dag
Elan S1 -64/ Elan race-replica 26R / Works Escort TwinCam -69/ Brabham BT41 Holbay
-
Dag-Henning - Third Gear
- Posts: 330
- Joined: 30 Sep 2004
8 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 23 guests