Pozidrive screws

PostPost by: pudge2260 » Mon May 16, 2022 1:25 am

Looking for a source who can provide chrome plated pozidrive screws. Restoring a 1970 +2 and as you know there are several lengths and sizes needed.
pudge2260
First Gear
First Gear
 
Posts: 39
Joined: 26 Oct 2019

PostPost by: RichardHawkins » Mon May 16, 2022 8:06 pm

Pudge,

My car is an S4 Elan, I bought stainless screws and polished the heads. Quite a lot of work, but I am pleased with result and there is no chrome to flake off.

Richard Hawkins
RichardHawkins
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1206
Joined: 05 Jul 2008

PostPost by: Steve Brooks » Tue May 17, 2022 8:04 am

Hello, like Richard if I replace a screw, I change it for a stainless steel one.I normally use Spalding fasteners.
72 Elan +2S 130/5
Put in the garage after a mot pass in 2012,trying to make it back out.(Almost there)
Steve Brooks
Second Gear
Second Gear
 
Posts: 62
Joined: 08 Oct 2014

PostPost by: Lotusian » Tue May 17, 2022 8:09 am

+1 for Spalding Fasteners.
Polishing stainless is easy if you have a lathe or use an electric drill held in a vice.
Ian
Lotusian
Second Gear
Second Gear
 
Posts: 126
Joined: 27 Nov 2016

PostPost by: HCA » Tue May 17, 2022 10:08 am

Technically, you should be using Phillips head screws. Similar, but providing you know the screws are Pozi and use the correct drive you will be ok.
Hal Adams
Evora S
Elan +2
User avatar
HCA
Coveted Fifth Gear
Coveted Fifth Gear
 
Posts: 1119
Joined: 03 Jan 2020

Total Online:

Users browsing this forum: No registered users and 24 guests

cron