Hot rough running
31 posts
• Page 3 of 3 • 1, 2, 3
Following on from my earlier message (about fuel), I've had problems if I used the castrol octane booster additive, but you're not... You could try leaving the additive out to see if that makes any difference.
Suspect the advice to do the electrickery bits first is best (i.e. coil, condenser etc).
C
Suspect the advice to do the electrickery bits first is best (i.e. coil, condenser etc).
C
-
Craig Elliott - Third Gear
- Posts: 309
- Joined: 15 Sep 2003
31 posts
• Page 3 of 3 • 1, 2, 3
Total Online:
Users browsing this forum: No registered users and 19 guests