Plus 2 dash wiring diagram and layout.......
7 posts
• Page 1 of 1
Hi Guys
Just rewiring the dash, does anyone have a wiring diagram and layout for an early plus 2 please. Also wire colour/identification for the indicator switch assy. Ours has 9 wires.
Many thanks
Berni
Just rewiring the dash, does anyone have a wiring diagram and layout for an early plus 2 please. Also wire colour/identification for the indicator switch assy. Ours has 9 wires.
Many thanks
Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
-
berni29 - Fourth Gear
- Posts: 821
- Joined: 10 Mar 2004
Hi
Thank you those are helpful. I had a good search on the net but did not see that post.
All the best
Berni
Thank you those are helpful. I had a good search on the net but did not see that post.
All the best
Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
-
berni29 - Fourth Gear
- Posts: 821
- Joined: 10 Mar 2004
Hi Brian
Thank you, but how does it flash if the flash wire is not used? Apologies for my ignorance!
Thanks again
Berni
Thank you, but how does it flash if the flash wire is not used? Apologies for my ignorance!
Thanks again
Berni
Zetec+ 2 under const, also 130S. And another 130S for complete restoration. Previously Racing green +2s with green tints. Yellow +2 and a couple of others, all missed. Great to be back 04/11/2021 although its all starting to get a bit out of control.
-
berni29 - Fourth Gear
- Posts: 821
- Joined: 10 Mar 2004
Hi Berni,
The early cars were wired with a system that operated using a 'headlamp flasher micro switch, a headlamp flasher unit and a relay' that operated if the headlamp vacuum switch was pulled when the light switch was off......
Have a look at the top right corner of the wiring diagram for the details of how it all worked..
Brian.
The early cars were wired with a system that operated using a 'headlamp flasher micro switch, a headlamp flasher unit and a relay' that operated if the headlamp vacuum switch was pulled when the light switch was off......
Have a look at the top right corner of the wiring diagram for the details of how it all worked..
Brian.
- ncm
- Third Gear
- Posts: 257
- Joined: 02 Jun 2006
7 posts
• Page 1 of 1
Total Online:
Users browsing this forum: Bigbaldybloke, pdenton26 and 13 guests