ELAN PLUS 2S130 Restoration, Before and After
53 posts
• Page 1 of 4 • 1, 2, 3, 4
I have posted many technical inquiries lately. For this post, I just thought it might be fun to put up the before and after of my 71 Plus 2S130 project, otherwise known as the Lotus Elan "Ebay Potluck Special", that I've been sorting for over a year..
The backstory: This was a disassembled, abandoned, restoration project, AS-IS, posted as a "Buy it Now" auction on Ebay back in February 2019. I didn't know if it would ever run, what condition the mechanicals were in, if the engine would even rotate, what was beyond repair, or what bits were present- in the parts boxes that came with the car. I had no idea as to the chassis condition either. There was no time to ask questions. I had just 6 photos to draw from and make my decision. I am an engineer, and the only "data" I had was "it looked pretty". Seemed reasonable to me. The body looked nice, the red paint looked good, and I loved the design. (the car was originally white.) I had not seen this model ever before. The body shape got to me but the rest was a complete mess. The interior was a miserable empty shell. The wiring was just hanging disconnected, and fragmented, like spaghetti. The engine bay had been riffled thru, with lots of bits missing in the auction photos. But an engine was generally present, along with a transmission that may/may not work properly. The only feature that worked on the car was inertia. (It would roll if you pushed it.) I kept wondering if buying a inoperative project car, sight unseen, was a cleverly conceived decision.
Given all that, and my impulsive nature toward life sometimes... I hit the "Buy it Now" button and it was suddenly mine. I was the proud owner of a crap-storm of unknowns. As well the proud owner of an Ebay invoice to pay, for $10k. I was in it- for better or worse. Made my way to Pensacola, to push it up on a U-haul, (photo above) and get it home. (My daughter traveled with me which made it a very memorable trip:) Once on the trailer I loaded 6 big tubs of unknown bits that were said to go somewhere on the car, along with two big boxes with the uninstalled forward and aft windscreens. I spotted all sorts of booklets and old paperwork, seats, headliner, carpet kit, and a lot of uninstalled hardware. I didn't go thru the tubs, just needed to get on the road, and head south to Broward county.
Its been quite an adventure, as everything needed to be sorted, reviewed, fixed, repaired or replaced. It was one big puzzle. Went out and got the tech manuals, parts book, and got started. Been going thru it system by system. Started with the electrical and fuel system. Then came hydraulics, cooling system, Ignition, exhaust, steering, suspension, and then I started some of the interior work in parallel. The worst "assigned task" was the wiring the car from front to back with 3 new harnesses. The dash was a miserable time, but now I can almost joke about it -almost. I've posted 2 or 3 threads bitching about it. (I mean asking for technical advice while enjoying putting the pieces together.) (The water pump replacement was not exactly fun either, but we went in from the oil sump rather than pull the head.)
Still have the CV joint upgrade to begin next, and will need an electrical headlamp lift conversion kit.
Hope to have the car ready for a test drive, just up and down the street by Christmas. If folks find these pictures interesting, I'll post some others before/afters. The photos are just siting in my phone. -And I love seeing other members projects and results. I thought I would just share these and see what happens...
Cheers guys,
MIke
Last edited by mjbeanie on Tue Mar 26, 2024 3:25 am, edited 14 times in total.
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
Ambitious, fast moving you.
Impressive passion, good work!
There is no cure.
Impressive passion, good work!
There is no cure.
Born, and brought home from the hospital (no seat belt (wtf)) in a baby!
Find out where the limits are, and start from there
Love your Mother
Earth
Find out where the limits are, and start from there
Love your Mother
Earth
-
h20hamelan - Coveted Fifth Gear
- Posts: 2067
- Joined: 25 Sep 2010
Congratulations! I have an inkling what you´ve been through and I love the spirit.
I did a similar thing with a rotten Triumph Stag, 73, many years ago. Took me seven years to completion, but I have a perfectionist leaning. With the car back on the road in 1974, it has been a joy ever since. But this here is not about Triumphs.
I have just bought a ´73 130/5 in quite a decent state (well, you never know), so expect some comments soon.
Matthias
I did a similar thing with a rotten Triumph Stag, 73, many years ago. Took me seven years to completion, but I have a perfectionist leaning. With the car back on the road in 1974, it has been a joy ever since. But this here is not about Triumphs.
I have just bought a ´73 130/5 in quite a decent state (well, you never know), so expect some comments soon.
Matthias
- Stagmatt
- First Gear
- Posts: 28
- Joined: 29 Dec 2022
Hello again guys,
Thanks for the kind feedback! Here's a second installment-
Engine bay:
The ever expanding engine bay recovery list is below. Started with the leaking water pump and ended with the leaking exhaust header. During first engine run, we were leaking all three fluids: oil, fuel, and coolant! Fun stuff. List of major components repairs & replacements is below. (The car was Cirrus white, and repainted just prior to the auction by the seller.)
-Stromberg carbs rebuilt, K&N airfilter system installed
-Water pump replaced (very painful)
-New Cooling fan, Radiator refurbished.
-Timing chain replaced
-All engine bay wiring replaced
-Relays replaced
-Brake Master cyl rebuilt, pedal box mod completed (4" hole saw not included)
-New clutch master and slave cylinder
-Exhaust system replaced from headers to tailpipe
(...Will post the front suspension and brake work in the next installment.
Stay tuned..Same Bat time, same Bat channel.)
Cheers,
MIke
Thanks for the kind feedback! Here's a second installment-
Engine bay:
The ever expanding engine bay recovery list is below. Started with the leaking water pump and ended with the leaking exhaust header. During first engine run, we were leaking all three fluids: oil, fuel, and coolant! Fun stuff. List of major components repairs & replacements is below. (The car was Cirrus white, and repainted just prior to the auction by the seller.)
-Stromberg carbs rebuilt, K&N airfilter system installed
-Water pump replaced (very painful)
-New Cooling fan, Radiator refurbished.
-Timing chain replaced
-All engine bay wiring replaced
-Relays replaced
-Brake Master cyl rebuilt, pedal box mod completed (4" hole saw not included)
-New clutch master and slave cylinder
-Exhaust system replaced from headers to tailpipe
(...Will post the front suspension and brake work in the next installment.
Stay tuned..Same Bat time, same Bat channel.)
Cheers,
MIke
Last edited by mjbeanie on Sun May 12, 2024 5:51 am, edited 2 times in total.
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
Thought this was a bit out of the ordinary and worth of photo...holy pedal box
The reservoir needed replacing as well due to an unfortunate dropping incident inducing a large hole!.. ugh.
The reservoir needed replacing as well due to an unfortunate dropping incident inducing a large hole!.. ugh.
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
Mike you are putting me to shame! It seems like you have gone past where I am with mine and I have been doing mine for... shall we just say a lot longer!! The wiring on the +2 130 is a night mare and I am in electrical engineering!! I have change the connections on switches etc on the dash 3-4 times but have it all working correctly now all with the superb support from the guys on this site! My excuse is I am still working in our electrical contracting buisness and still have to make sure I keep the wife happy with repairs to the house!!
Any way I have made good progress but probably like you keep finding that parts that I did have are now missing
The plan is to have the car back on the road next year with a trip to Scotland planned. There I have said it in public so watch this space. I see you have the original steering wheel I have losses the plastic boss rare as hens teeth apparently so possibly a new replacement for Christmas. Hope to see your on the road soon and hopefully I will post pictures of my progress.
Any way I have made good progress but probably like you keep finding that parts that I did have are now missing
![Crying or Very sad :cry:](https://lotuselan.net/forums/images/smilies/icon_cry.gif)
- Rob1n
- First Gear
- Posts: 48
- Joined: 16 Aug 2011
Thanks for the reply Rob1n. Yeah the dash, along with the aftermarket harness mistakes was a terrible mess. Old harness did provide some help but the new harness wasn't remotely close to the Lotus wiring diagram in many aspects! Also the aftermarket switches available don't always function as the original switches. I retained the 50 year old Lotus Park lights switch, Heater switch, and 3 Pole Hazard switch. They were ugly looking, but worked as intended. It took forever to get about 60% of it sorted on my dining room table. Another 20% was sorted with the dash lightly positioned in the car, but uninstalled for testing.
Then I had to go back to the drawing board to crimp flag connectors on all the connections, since there was that awful clearance problem, with the heater. I needed to recover about 3/4" in overall "width" of the assembly. A photo is below.
Then came the last 20% integrating with all the accessories, engine bay and body harness, DIP switch, indicators and the infamous DB 10 relay box. It was a dark time literally and figuratively. My wife was delighted when she got the dining table back for eating, versus soldering.
Decided to add some photos from those days....Look forward to hearing about your progress Rob1n.
Cheers all,
Mike
Then I had to go back to the drawing board to crimp flag connectors on all the connections, since there was that awful clearance problem, with the heater. I needed to recover about 3/4" in overall "width" of the assembly. A photo is below.
Then came the last 20% integrating with all the accessories, engine bay and body harness, DIP switch, indicators and the infamous DB 10 relay box. It was a dark time literally and figuratively. My wife was delighted when she got the dining table back for eating, versus soldering.
Decided to add some photos from those days....Look forward to hearing about your progress Rob1n.
Cheers all,
Mike
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
looking great at least you will know its been done by someone you trust! Are those original Lotus fitted rocker switches still available? Window switches etc? They often look worn out on some cars?
- Ginettaman
- New-tral
- Posts: 13
- Joined: 05 Nov 2023
The original switches are hard to find for sure. Once in awhile they surface on Ebay but they're pricey, and sometimes Dave Bean in CA, has some laying around. The OEM switches are best, and mesh much better in functionality with the aftermarket harnesses, than the aftermarket switches. The original hazard switch is a rare 3 pole switch 10 amp! The replacement offered by RD enterprises is only a light duty, DPDT switch, and will require an additional diode to be wired in. I tried it and while it did work, the diode fried in a short time. It was a mess. So I got the old tired harness out of the box and robbed the OEM beefy switch from it. It worked great. Same for the heater switch. For higher current loads I opted the old, faded, original factory switches.
I also had to use a dremel tool to adapt the aftermarket switches as they are a bit to fat for the slot and may bind. They also sit back in the slot which is also discouraging, since the mounting tabs are also different. The reality is the aftermarket switches are not high quality, but there are not many choices available. Good luck with your efforts and hope you find some Lotus switches!
I also had to use a dremel tool to adapt the aftermarket switches as they are a bit to fat for the slot and may bind. They also sit back in the slot which is also discouraging, since the mounting tabs are also different. The reality is the aftermarket switches are not high quality, but there are not many choices available. Good luck with your efforts and hope you find some Lotus switches!
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
Front end work completed: Disassembled, degreased, cleaned, and repainted the all front suspension hardware and wheel well. Installed new calipers, pads, discs, brake lines, New lower A arms, boots, tie rods, stabilizer bar bushes, steering rod links, and trunions. I think that's most of it. I didn't take a "before photo" but the hardware was pretty ugly and tired looking.
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
It's a shame somebody hasn't reproduced good quality replacements to match.
- Ginettaman
- New-tral
- Posts: 13
- Joined: 05 Nov 2023
Today's update includes new improved door card effort. ( the final result is above)
The fun part about this restoration is that you can switch between technical troubleshooting one day and "arts and crafts" the following day. I like the variety-always interesting. And sometimes the arts and crafts is very therapeutic, instead of mechanical or electrical work each day.
In any case, my door cards had disintegrated. The backboards were trashed. The lower "carpeted portion" of the card was beyond help. However, the original upper vinyl section was salvageable. I always liked that part of the door panel since it meshes nicely with the console. (Didn't love the shag carpeting used on the lower half much anyway.)
I purchased heavy cardboard stock from an aftermarket performance car place for 15 bucks. Cut the panels as best as I could and fitted the metal door cap to the card. The vinyl was attached using contact adhesive and clamps. My wife is working to stitch some comparable black vinyl together which I plan to glue to the lower half of the cards. I will probably investigate another method to attach the cards to the door and may avoid the original clip method altogether. Another update will follow. Stay safe and be well.
Cheers everyone,
Mike
Last edited by mjbeanie on Tue Mar 26, 2024 3:07 am, edited 2 times in total.
'71 Lotus Elan Plus 2S130 (Type 50/0179)
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
'70 Opel GT
'67 Sunbeam Alpine
'88 Porsche 924 S
'67 Elan S3 DHC
- mjbeanie
- Second Gear
- Posts: 165
- Joined: 29 Mar 2019
53 posts
• Page 1 of 4 • 1, 2, 3, 4
Total Online:
Users browsing this forum: No registered users and 21 guests