Metallic rattle
Hi all
I was out for a drive recently and noticed a very brief metallic rattle at certain times while driving. At first I thought it was completely random but eventually narrowed it down to the following situation:
Around 2200 rpm
Only when gently lifting off accelerator
Doesn?t occur when freewheeling
Doesn?t occur under acceleration.
Occurs in any gear
Happens very briefly unless I very consciously keep it in that rev range.
I would describe the sound as like a bike chain on a metal surface
My engine has done 6000 miles since being rebuilt and is driving beautifully. Could it be that the timing chain is a little loose?
Thanks for any assistance
Andy
I was out for a drive recently and noticed a very brief metallic rattle at certain times while driving. At first I thought it was completely random but eventually narrowed it down to the following situation:
Around 2200 rpm
Only when gently lifting off accelerator
Doesn?t occur when freewheeling
Doesn?t occur under acceleration.
Occurs in any gear
Happens very briefly unless I very consciously keep it in that rev range.
I would describe the sound as like a bike chain on a metal surface
My engine has done 6000 miles since being rebuilt and is driving beautifully. Could it be that the timing chain is a little loose?
Thanks for any assistance
Andy
- andyhay
- First Gear
- Posts: 47
- Joined: 03 Feb 2016
Does it happen at those revs when stationary, or just on the move ?
Richard
'72 Sprint
'72 Sprint
- richardcox_lotus
- Coveted Fifth Gear
- Posts: 1098
- Joined: 11 Jul 2004
I vote for the timing chain tension as well.
Tony Vaccaro
LOONY (Lotus Owners of New York)
http://www.lotusowners.com
Drive Fast Take Chances
72 Elan Sprint, 93 Caterham (Bought new), 05 Elise RD (Bought new),
99 Elise190, 05 Elise BLK (Bought nearly new), 2024 Emira, 2005 MiataSpeed Turbo
LOONY (Lotus Owners of New York)
http://www.lotusowners.com
Drive Fast Take Chances
72 Elan Sprint, 93 Caterham (Bought new), 05 Elise RD (Bought new),
99 Elise190, 05 Elise BLK (Bought nearly new), 2024 Emira, 2005 MiataSpeed Turbo
-
tvacc - Fourth Gear
- Posts: 592
- Joined: 24 Dec 2003
Yeah, I thought if it could not be produced while stat, I said to myself, how could it be the timing chain? But I remember back in 86 with my Sprint, I seem to recall it would only do it under load and then releasing. And that issue was a chain that had stretched. Maybe Rohan can chime in.
Tony Vaccaro
LOONY (Lotus Owners of New York)
http://www.lotusowners.com
Drive Fast Take Chances
72 Elan Sprint, 93 Caterham (Bought new), 05 Elise RD (Bought new),
99 Elise190, 05 Elise BLK (Bought nearly new), 2024 Emira, 2005 MiataSpeed Turbo
LOONY (Lotus Owners of New York)
http://www.lotusowners.com
Drive Fast Take Chances
72 Elan Sprint, 93 Caterham (Bought new), 05 Elise RD (Bought new),
99 Elise190, 05 Elise BLK (Bought nearly new), 2024 Emira, 2005 MiataSpeed Turbo
-
tvacc - Fourth Gear
- Posts: 592
- Joined: 24 Dec 2003
The timing chain gets tighter when the engine is hot so its unlikely to be a loose chain causing a rattle that only occurs when hot. If it only occurs when moving on transition during lift off it suggests its related to the drive train and not engine - i.e. clutch, gear box prop shaft diff etc and related to something moving with drive train load and coming loose or hitting something else.
Put a passenger in the car and get them to move around and try to identify the location more precisely is my normal approach with this sort of intermittent and hard to locate noise. Always check for anything loose in the boot or glove box or which should otherwise be bolted down tight that may resonate at the specific revs and load
cheers
Rohan
Put a passenger in the car and get them to move around and try to identify the location more precisely is my normal approach with this sort of intermittent and hard to locate noise. Always check for anything loose in the boot or glove box or which should otherwise be bolted down tight that may resonate at the specific revs and load
cheers
Rohan
Last edited by rgh0 on Mon Jan 07, 2019 7:59 pm, edited 1 time in total.
-
rgh0 - Coveted Fifth Gear
- Posts: 8415
- Joined: 22 Sep 2003
I had similar symptoms which occurred on the over run at a certain rpm range. I became convinced it was the exhaust rattling on a heat shield or something as that is exactly what it sounded like - seemed to get worse when hot or after a long run
Turns out it was the gearbox - not stripped yet but the tail shaft bush is very worn (had a bad oil leaks here as well) or perhaps its a worn input shaft bearing? New gearbox fitted and the noise has stopped
Turns out it was the gearbox - not stripped yet but the tail shaft bush is very worn (had a bad oil leaks here as well) or perhaps its a worn input shaft bearing? New gearbox fitted and the noise has stopped
- jono
- Coveted Fifth Gear
- Posts: 1860
- Joined: 17 May 2007
While my first stop would be the forcing effect that deceleration has in changing the attitude of engine and drivetrain in their mounts, affecting anything attached to them that is in close proximity to anything else, "only when hot" might also suggest a mixture that goes rich for a moment when the throttle plates snap shut. On Italian cars and motorcycles, this often causes either burbling or backfiring as some of the unburned mixture sneaks out into the header pipe and ignites there. Contained entirely in the exhaust system as in minor cases, it might sound like a rattle instead.
- denicholls2
- Fourth Gear
- Posts: 552
- Joined: 23 Jan 2006
Total Online:
Users browsing this forum: No registered users and 15 guests