Davies Craig Electric Water Pump
5 posts
• Page 1 of 1
Anyone aware of the possibility of replacing the bearing in a Davies Craig electric water pump?
Mine is a lot noisy and needs a replacement but somewhere in the distant past I think I was informed they are not serviceable?
It's the150 largest aluminium bodied size unit, for reference.
If anyone has experience in doing it , or knowing how to go about it, any advice would be appreciated,
Thanks,
Phil.
Mine is a lot noisy and needs a replacement but somewhere in the distant past I think I was informed they are not serviceable?
It's the150 largest aluminium bodied size unit, for reference.
If anyone has experience in doing it , or knowing how to go about it, any advice would be appreciated,
Thanks,
Phil.
Philip.
UK '72 Sprint DHC
Sometimes my Lotus makes me cry.
UK '72 Sprint DHC
Sometimes my Lotus makes me cry.
-
l10tus - Third Gear
- Posts: 477
- Joined: 10 Apr 2008
- Location: Shropshire, United Kingdom.
Phil
From memory T7 Design sell quite a few parts for Davies Craig:
https://www.t7design.co.uk/
I have no affiliation but they have supplied me with some interesting parts.
Andrew
From memory T7 Design sell quite a few parts for Davies Craig:
https://www.t7design.co.uk/
I have no affiliation but they have supplied me with some interesting parts.
Andrew
1965 Lotus Elan S2 26/4022 (originally Dutchess Lotus East, PA and NJ Area, USA)
- Frogelan
- Fourth Gear
- Posts: 615
- Joined: 03 Jul 2017
- Location: Paris, France
Andrew,
Thanks for the reply. So does that mean you have stripped and replaced the bearings?
Thanks for the reply. So does that mean you have stripped and replaced the bearings?
Philip.
UK '72 Sprint DHC
Sometimes my Lotus makes me cry.
UK '72 Sprint DHC
Sometimes my Lotus makes me cry.
-
l10tus - Third Gear
- Posts: 477
- Joined: 10 Apr 2008
- Location: Shropshire, United Kingdom.
No, I have been quietly building my own heating system but they also supply lots of interesting bits for the anorak minded!
As a DC stockist they may be able to help.
Andrew
As a DC stockist they may be able to help.
Andrew
1965 Lotus Elan S2 26/4022 (originally Dutchess Lotus East, PA and NJ Area, USA)
- Frogelan
- Fourth Gear
- Posts: 615
- Joined: 03 Jul 2017
- Location: Paris, France
l10tus wrote:Anyone aware of the possibility of replacing the bearing in a Davies Craig electric water pump?
...
It's the150 largest aluminium bodied size unit, for reference.
I would be interested in photos (and comments if applicable) of the actual installation if available (and personnal impression about reliability) - thank you !
S4SE 36/8198
-
nmauduit - Coveted Fifth Gear
- Posts: 2077
- Joined: 02 Sep 2013
- Location: France
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 3 guests