+2[and not Elan] Tool kit

PostPost by: gus » Sat Jul 18, 2020 3:33 pm

]My car was 14 years old when I purchased it and came with the tool kit in a vinyl pocked roll up sleeve.It also came with the Elan style tool roll.
The jack has a ratcheting handle, and there is the 'Nader nut' wrench, so it really does not fit in the Elan roll.
Did someone just pick up the plastic thing, it is pretty 'period' IOW it wasn't newish when I bought the car.
Is it perhaps a Federal thing, with the different knock ons?

Also, is the 'tube wrench' listed as 14mm on the Elan kit[ and in the +2 parts manual] a lug wrench, and perhaps deleted in KO cars?

Mine also came with a tiny 'King Dick' adjustable. Opens to maybe 1/2 inch, 3" overall length or so. Not a product likely to be found here as it is a Brit brand
I also redid the jack hold downs.

jack hold down.jpg and


and had forgotten how useless they are. Iwill have to add some foam to the bottom of the boot floor to stop them from rattling badly
This is the buckle if you are curious
https://www.mcmaster.com/9576T65/

Additionally, by hold down straps used separate bolts, no the shield bolts, but they could have been changed

Also is the tool kit supposed to be stuffed in with the jack, or with the spare or...?
gus
Fourth Gear
Fourth Gear
 
Posts: 721
Joined: 05 May 2011

PostPost by: gus » Sat Jul 18, 2020 5:21 pm

tools.jpg and
gus
Fourth Gear
Fourth Gear
 
Posts: 721
Joined: 05 May 2011

Total Online:

Users browsing this forum: No registered users and 5 guests