3 eared spinner knock off tool
5 posts
• Page 1 of 1
I have purchased from a guy on ebay a tool for using on +2 130 alloys, he normally sells the octagonal ones but made one for spinners.
It needs a 36mm six point socket and cost ?54.50, my only concern was that it is not a tight fit on the lugs but with a small piece of towelling over the spinner it works fine and protects the chrome.
Hope this is of interest. John
It needs a 36mm six point socket and cost ?54.50, my only concern was that it is not a tight fit on the lugs but with a small piece of towelling over the spinner it works fine and protects the chrome.
Hope this is of interest. John
- checkrail
- Third Gear
- Posts: 287
- Joined: 17 Oct 2018
Good info, but would be nice to see a picture and/or a link to seller.
1964 S1 (in boxes)
1967 S3 DHC
1969 S4 FHC
https://theelanman.com for details on Brian Bucklands book.
https://shop.lotus-books.com for more Lotus related books.
We ship worldwide. PM/Email me.
1967 S3 DHC
1969 S4 FHC
https://theelanman.com for details on Brian Bucklands book.
https://shop.lotus-books.com for more Lotus related books.
We ship worldwide. PM/Email me.
- gherlt
- Third Gear
- Posts: 488
- Joined: 20 Jul 2006
I think he is referring to ones like the two below.
I have one like these and I really like it. I also have the one with the leather and metal, but prefer the all aluminium one.
https://www.ebay.co.uk/itm/lotus-3-Eare ... 7675.l2557
https://www.ebay.co.uk/itm/Lotus-Elan-W ... 7675.l2557
I have one like these and I really like it. I also have the one with the leather and metal, but prefer the all aluminium one.
https://www.ebay.co.uk/itm/lotus-3-Eare ... 7675.l2557
https://www.ebay.co.uk/itm/Lotus-Elan-W ... 7675.l2557
- danielmo
- Second Gear
- Posts: 102
- Joined: 05 Nov 2003
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 17 guests