Knock On Hub Extractors

[jeff jackson]

I've got some drawings of the original Lotus one if anyone wants it. I did send it to Darren in Adelaide, as he said he had a mate with a machine shop who could knock it up. Universal BTW. and simple. ( like me)
Regards
Jeff 72+2

[pmallinson]

Hi Peter...I'll have one if you get them made up.
Mark

Mark

Finally back home in Ireland and have the extractors ready for posting off, If you send me a PM or reply to this with your address I'll send one off for you.

The price will be 25 quid inc P&P and NO VAT or anything, cheque made payable to

Peter Mallinson
SheenView B&B
Killaha East
Kenmare
County Kerry
Republic of Ireland

If anyone else is interested please contact me as if not they are then going on Ebay and we all know what crazy prices can happen on there !!

Cheers and som Guinness now to be drank

[richardcox_lotus]

Hi Peter

Does your extractor fit the hubs on Elans, as well as +2's ?

Regards

Richard

[elanmac]

I recently used a hub extractor made to the Ross/ Robinshaw drawing and had no problem at all. There was no damage to either of my spinners.

[pmallinson]

Hi Peter

Does your extractor fit the hubs on Elans, as well as +2's ?

Regards

Richard

Richard

As far as I'm aware they are the same size as when I bought new spinners as far as I can remember they were just listed as Elan 3 eared spinners ?
So this being the case then yes they will fit but if they are different then sorry

Cheers

[pmallinson]

Well gents

I have sold 4 to you great people and now they are going on ebay so we'll see how they do on there, 1 advertised and already starting bid made and 15 wathcers !!

Cheers

[SimonH]

Peter,

YHM for one extractor.

Cheers,
Simon

[stuartgb100]

Peter,

Mine arrived yesterday........ a nice piece of engineering !

Many thanks and Regards,
Stuart.

[pmallinson]

Hi Peter...I'll have one if you get them made up.
Mark

Mark

Finally back home in Ireland and have the extractors ready for posting off, If you send me a PM or reply to this with your address I'll send one off for you.

The price will be 25 quid inc P&P and NO VAT or anything, cheque made payable to

Peter Mallinson
SheenView B&B
Killaha East
Kenmare
County Kerry
Republic of Ireland

If anyone else is interested please contact me as if not they are then going on Ebay and we all know what crazy prices can happen on there !!

Wished I'd put them all on eBay !! one sold for 100 GBP + P&P and another bought for 98 GBP + P&P maybe I could go into business on these

Cheers

[pmallinson]

Well Gents

That's the last of the hub extractors sold on eBay and I'm pleased with the way they did.

For those of you who supported this project from the original posting (Fri 13th Oct) and bought one for 25 quid inc P&P it seems you got a good deal and you are more than welcome to it.

It is though incredible the amount of people that have tried to buy one via email for 25 quid SINCE they were were making more on eBay !! It just goes to show how wary we are and then we throw all that to the wind if we consider there's a 'bargain' to be had !! as they say he who hesitates >>>>>>>>>>>>>>

They have now all gone 10 of them 6 to elanweb people (thanks for your support) and 4 on eBay. I MAY make some more in the future but I have not the thread size and pitch with me this trip in Vietnam to make them up (last time I brought a pair of my old 3 eared spinners to copy from one from each side):roll:

Cheers and many Beers

[ecamiel]

Does anyone make one for bolt on hubs?

Eric
64 S1