A Arm Metalastic Bushes - Quick And Easy Removal..

[ceejay]

As you will probably know, the original Metalastic bushes that have been in the A arms for decades can be sods to remove, but with a press fixture and a couple of simple pressing mandrels, the job can be done in just a few minutes.
We made a video to share the How To.
[url]http://elantrikbits.com/lotus-elan-blog/lotus-elan-removing-a-arm-bushes/
[/url]
Enjoy.

[Gopherit]

Col -
See viewtopic.php?f=42&t=16368&p=83156#p83156

Paul

[ceejay]

Yes, screw press type extractors will also work...but much less effort with mandrels and a press though...just a few minutes work, mandrels cost was zero... made from scrap steel...and about 30mins on the lathe, good that you did what you did.

[Mazzini]

Col -
See viewtopic.php?f=42&t=16368&p=83156#p83156

Paul

They worked superbly! Thanks again.

[Davidb]

I used two old sockets and my 5 inch Record vice-works like a charm!