Hand Brake Question

PostPost by: Lotus14S2 » Thu Aug 02, 2018 6:24 pm

I have seen photos of a "fly-off" style hand brake...i think on 26R cars.

Is there a fly-off style hand brake system that can be adapted to the standard Elan.
I have a S1, and I hate the standard pull type hand brake.

Thanks for your help.
Regards,
Tim
'62 S2 Elite
'63 S1 Elan
Lotus14S2
Second Gear
Second Gear
 
Posts: 119
Joined: 31 Aug 2008

PostPost by: Melodyk » Tue Oct 09, 2018 7:45 pm

Hello. I posted some info a while back about fitting a hydraulic handbrake. It wasn?t a fly off one though. It just locked the brakes on and you turned it to let the brakes off. It was fitted to the side of the tunnel and was much easier to reach and operate than the one under the dash. We have a plus 2. The brake lines go down the side of the central tunnel so easy to tap into.
50/0060
Melodyk
First Gear
First Gear
 
Posts: 47
Joined: 01 Aug 2011

PostPost by: Barney » Tue Oct 09, 2018 8:24 pm

Melodyk wrote: I posted some info a while back about fitting a hydraulic handbrake.

http://www.lotuselan.net/forums/elan-mods-f31/hydraulic-handbrake-t40100.html
Elan S2 DHC (26-4399),
Barney
Second Gear
Second Gear
 
Posts: 215
Joined: 13 Aug 2007

Total Online:

Users browsing this forum: No registered users and 28 guests