Lotus Elan

Knock On Hub Dimensions

PostPost by: danielmo » Fri Feb 09, 2018 4:15 pm

Hi, does anyone know the OD and ID of the rear knock on hubs as well as the diameter and PCD of the drive pins?

Thanks,
Dan
danielmo
Second Gear
Second Gear
 
Posts: 151
Joined: 05 Nov 2003

PostPost by: ericbushby » Fri Feb 09, 2018 7:14 pm

Hi Dan,
The PCD of the drive pins on a Series 3 Elan is five and a half inches. Sorry, I don`t know the other.
Eric in Burnley
1967 S3SE DHC
ericbushby
Fourth Gear
Fourth Gear
 
Posts: 831
Joined: 13 Jun 2011
Location: east lancashire

PostPost by: danielmo » Fri Feb 09, 2018 7:17 pm

Thanks Eric, that helps.
danielmo
Second Gear
Second Gear
 
Posts: 151
Joined: 05 Nov 2003

PostPost by: RichardHawkins » Sat Feb 10, 2018 2:07 pm

Dan,

I am away from home at the moment, but if I remember correctly the drive pegs are 7/16" diameter.

Richard Hawkins
RichardHawkins
Fourth Gear
Fourth Gear
 
Posts: 758
Joined: 05 Jul 2008
Location: Lincolnshire U.K.

PostPost by: danielmo » Sat Feb 10, 2018 3:49 pm

Thanks Richard.
danielmo
Second Gear
Second Gear
 
Posts: 151
Joined: 05 Nov 2003

Total Online:

Users browsing this forum: saildrive2001, StressCraxx, tvacc and 14 guests