Brake Pads......Carbotech AX6 ?
21 posts
• Page 2 of 2 • 1, 2
I received the pad sets from Porterfield last week.
Fronts are GD533-R4S - $60/Set
Rears are GD524-R4S - $100/Set
I went to install the new pads today. All went well until I removed the right rear wheel and discovered early signs of brake fluid leakage from the caliper. So all of the calipers will come off to be rebuilt. Will get new hoses too. They are all due. Service from Porterfield has been excellent.
Regards,
Dan
Fronts are GD533-R4S - $60/Set
Rears are GD524-R4S - $100/Set
I went to install the new pads today. All went well until I removed the right rear wheel and discovered early signs of brake fluid leakage from the caliper. So all of the calipers will come off to be rebuilt. Will get new hoses too. They are all due. Service from Porterfield has been excellent.
Regards,
Dan
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1279
- Joined: 26 Sep 2003
Hi Dan,
i bought some Stainless Steel Rear Caliper Pistons from the USA very nice + good price.
John Farrell Auto Parts, 57D Alder Street, W. Babylon NY 11704 part n? 64325873 S.S. Pistons.
Orders 800 454-7977, fax 631-694-7217, www.jfarrellauto.com
Alan
i bought some Stainless Steel Rear Caliper Pistons from the USA very nice + good price.
John Farrell Auto Parts, 57D Alder Street, W. Babylon NY 11704 part n? 64325873 S.S. Pistons.
Orders 800 454-7977, fax 631-694-7217, www.jfarrellauto.com
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3757
- Joined: 06 Dec 2008
alan.barker wrote:Hi Dan,
i bought some Stainless Steel Rear Caliper Pistons from the USA very nice + good price.
John Farrell Auto Parts, 57D Alder Street, W. Babylon NY 11704 part n? 64325873 S.S. Pistons.
Orders 800 454-7977, fax 631-694-7217, http://www.jfarrellauto.com
Alan
Thanks very much, Alan. I'm may need them.
Regards,
Dan
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1279
- Joined: 26 Sep 2003
I started to remove the rear calipers and found one of the pistons stuck. Not wanting to use pliers or compressed air on the pistons I had a look at the Elan shop manual. The answer was there in Section J. (Paraphrased)
Make sure the master reservoir is full.
Put the car on jack stands, remove the wheels.
Remove the brake pads from all four calipers.
Pump the master gently to push all 8 pistons to the rotors.
Remove each caliper and disassemble.
Worked a treat as they say.
Regards,
Dan
Make sure the master reservoir is full.
Put the car on jack stands, remove the wheels.
Remove the brake pads from all four calipers.
Pump the master gently to push all 8 pistons to the rotors.
Remove each caliper and disassemble.
Worked a treat as they say.
Regards,
Dan
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1279
- Joined: 26 Sep 2003
I would suggest you remove the pads from one caliper, press pedal to move piston. Then top up master and do the same to next caliper. One caliper at a time.
Alan
Alan
Alan.b Brittany 1972 elan sprint fhc Lagoon Blue 0460E
- alan.barker
- Coveted Fifth Gear
- Posts: 3757
- Joined: 06 Dec 2008
alan.barker wrote:I would suggest you remove the pads from one caliper, press pedal to move piston. Then top up master and do the same to next caliper. One caliper at a time.
Alan
Thanks Alan, I'll probably do it that way, but it takes all the suspense out of the task. That's a good idea.
There is no cure for Lotus, only treatment.
-
StressCraxx - Coveted Fifth Gear
- Posts: 1279
- Joined: 26 Sep 2003
21 posts
• Page 2 of 2 • 1, 2
Total Online:
Users browsing this forum: No registered users and 25 guests