Wheel Straighteners
6 posts
• Page 1 of 1
Bill,
I was unable to find a company to correct my wheels. However, reviewing my post on this subject I found someone suggesting a company called MWS contact is Craig Ellis phone 01753 598387. I don't know where in the country they are.
I ended up replacing the rims, and welding them to the centres. I bought the rims from a German company Mefro. I am fortunate in having a lathe just big enough for the job. I employed a local engineering company to do the welding. My car is a long restoration and not running yet, so can't say how successful I have been.
Richard Hawkins
I was unable to find a company to correct my wheels. However, reviewing my post on this subject I found someone suggesting a company called MWS contact is Craig Ellis phone 01753 598387. I don't know where in the country they are.
I ended up replacing the rims, and welding them to the centres. I bought the rims from a German company Mefro. I am fortunate in having a lathe just big enough for the job. I employed a local engineering company to do the welding. My car is a long restoration and not running yet, so can't say how successful I have been.
Richard Hawkins
- RichardHawkins
- Coveted Fifth Gear
- Posts: 1277
- Joined: 05 Jul 2008
Hmm, they only mention wire wheels on their site, but it should be worth a phone call.
I see they are in Slough.
Several possiblities come up when I google [wheel straightening]
Bill Williams
36/6725 S3 Coupe OGU108E Yellow over Black.
36/6725 S3 Coupe OGU108E Yellow over Black.
- billwill
- Coveted Fifth Gear
- Posts: 4417
- Joined: 19 Apr 2008
+1
We use them for allot of our wheels and never had a problem with them. They do specialise in Wires but they will take on anything.
http://www.mwsint.com/site/cms/contentC ... tegory=216
We use them for allot of our wheels and never had a problem with them. They do specialise in Wires but they will take on anything.
http://www.mwsint.com/site/cms/contentC ... tegory=216
Chris
-
Grizzly - Coveted Fifth Gear
- Posts: 1862
- Joined: 13 Jun 2010
6 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 40 guests