S2 Steering rack greasing
5 posts
• Page 1 of 1
I am just about to service my 1965 S2 for the first time and having had a quick look it appears that there is no grease nipple or access to one on the steering rack. The fibreglass below the radiator hides this area much more than on an S4.
I have only worked on S4 models in the past and they all had a grease nipple
(or blank to fit one).
Is access impossible without cutting away some fibreglass?
many thanks, Ken.
I have only worked on S4 models in the past and they all had a grease nipple
(or blank to fit one).
Is access impossible without cutting away some fibreglass?
many thanks, Ken.
Slightly confused by everything since the invention of the wheel.
- ken ob
- Second Gear
- Posts: 164
- Joined: 13 Nov 2010
In 30 years of owning an S2 I have never greased the steering rack (it was replaced with a new unit circa 25+ years ago as part of a full restoration / chassis replacement) & it is still perfectly tight!!
Provided that the rubbers are in perfect condition & totally sealed, water cannot get in & grease cannot get out (this is a car that has been very carefully inspected & fully serviced every year irrespective of mileage - used regularly for competition / track stuff as well as on the road)
Provided that the rubbers are in perfect condition & totally sealed, water cannot get in & grease cannot get out (this is a car that has been very carefully inspected & fully serviced every year irrespective of mileage - used regularly for competition / track stuff as well as on the road)
- Maulden7
- Second Gear
- Posts: 212
- Joined: 10 Aug 2004
Hi
Pull the boot at the pinion end and inspect/add grease as required
I am +1 with Maulden7
Pull the boot at the pinion end and inspect/add grease as required
I am +1 with Maulden7
John
+2s130 1971
+2s130 1971
-
Hawksfield - Fourth Gear
- Posts: 603
- Joined: 14 Jul 2004
5 posts
• Page 1 of 1
Total Online:
Users browsing this forum: No registered users and 36 guests