Weber carbs set-up
2 posts
• Page 1 of 1
Post by: ROADRUNNER » Sun Aug 31, 2014 11:28 am
Can anyone recommend someone to set up and balance the Webers on my S2, ideally near London (SW) ?
- ROADRUNNER
- Second Gear
- Posts: 53
- Joined: 06 Aug 2005
Post by: twincamman » Sun Aug 31, 2014 5:32 pm
No need to go out for a webber set up ......first you
Need a balancer like a unison or some flow meter to match the carbs flow front to back . Next set the mixture screws 1 and 1/4 turns from the bottom ...drive the car and do the final mixture ...
easy ...Ed
Need a balancer like a unison or some flow meter to match the carbs flow front to back . Next set the mixture screws 1 and 1/4 turns from the bottom ...drive the car and do the final mixture ...
easy ...Ed
dont close your eyes --you will miss the crash
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
Editor: On June 12, 2020, Edward Law, AKA TwinCamMan, passed away; his obituary can be read at https://www.friscolanti.com/obituary/edward-law. He will be missed.
-
twincamman - Coveted Fifth Gear
- Posts: 2463
- Joined: 02 Oct 2003
2 posts
• Page 1 of 1
Total Online:
Users browsing this forum: elans3 and 36 guests
Site map
SitemapIndex
RSS Feed