Plus 2 Fuel cap leaks
36 posts
• Page 2 of 3 • 1, 2, 3
I actually left a 1~2mm wide lip on the inside at the top too to help me pull it out........
just something to get your fingers under......
the first one I did I made from aluminium and put a couple of small allen bolts in so I could pull it out......
just something to get your fingers under......
the first one I did I made from aluminium and put a couple of small allen bolts in so I could pull it out......
-
theelanman - Coveted Fifth Gear
- Posts: 1434
- Joined: 17 Sep 2003
At the risk of much clucking, there is an alternative.
I think the normal fuel inlet looks a bit like a carbuncle on the +2, so I quite like the
leakproof one.
I think the normal fuel inlet looks a bit like a carbuncle on the +2, so I quite like the
leakproof one.
- vincereynard
- Coveted Fifth Gear
- Posts: 1240
- Joined: 12 Jan 2015
Hear,hear ! The best lines of any classic and you have a carbuncle sat on the rear wing...
John
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 5745
- Joined: 21 Sep 2003
Rich135 wrote:Where does that fuel cap come from Vince? Looks good to me.
It pains me greatly to mention it, but it was fitted by Spyder for the previous owner.
Total job (with paint) cost a fairly amazing ?445! Including a non leak neck? I assume the car not Wiggy.
Easily available many places as "aircraft style" and / or "flush fitting" although it looks more motorbike style to me. Works well (no leaks) and lockable.
> 2" - https://www.ebay.co.uk/itm/310844272762 (Demon Tweaks)
3" - https://www.ebay.co.uk/itm/360941237482
Last edited by vincereynard on Thu Feb 14, 2019 3:55 pm, edited 1 time in total.
- vincereynard
- Coveted Fifth Gear
- Posts: 1240
- Joined: 12 Jan 2015
https://www.ebay.co.uk/itm/Cell-Gas-Cap ... rk:30:pf:0
if you've got your Blue Peter badge , I'm sure you'd make it fit...
?22.38 if you don't mind waiting....from Ping Pong..
John
if you've got your Blue Peter badge , I'm sure you'd make it fit...
?22.38 if you don't mind waiting....from Ping Pong..
John
-
john.p.clegg - Coveted Fifth Gear
- Posts: 5745
- Joined: 21 Sep 2003
Rich135 wrote:Thanks very much Vince. ?445, wow, that's a chunk of change!
Indeed ?25 > ?445 is a nice little earner. But at least it works!
If you want any more shots inside the boot just ask.
- vincereynard
- Coveted Fifth Gear
- Posts: 1240
- Joined: 12 Jan 2015
vincereynard wrote:Rich135 wrote:Thanks very much Vince. ?445, wow, that's a chunk of change!
Indeed ?25 > ?445 is a nice little earner. But at least it works!
If you want any more shots inside the boot just ask.
Thanks very much. Dare I ask if they made holes in the fibreglass to take those screws
- Rich135
- Second Gear
- Posts: 107
- Joined: 08 Mar 2016
Rich135 wrote:Thanks very much. Dare I ask if they made holes in the fibreglass to take those screws
I'll have a look. My guess is surely they must have!
Meanwhile here's a shot of Toad on West Wycombe hill. Above the Hell Fire Caves!
Spot the lack of carbuncle?
- vincereynard
- Coveted Fifth Gear
- Posts: 1240
- Joined: 12 Jan 2015
Here's a shot from underneath. Not much to see really.
It appears to have been quite well done so I imagine Spyder had it done somewhere else.
I'll have to see if I can move the rubber elbow up a touch and get rid of the kink!
It appears to have been quite well done so I imagine Spyder had it done somewhere else.
I'll have to see if I can move the rubber elbow up a touch and get rid of the kink!
- vincereynard
- Coveted Fifth Gear
- Posts: 1240
- Joined: 12 Jan 2015
36 posts
• Page 2 of 3 • 1, 2, 3
Total Online:
Users browsing this forum: No registered users and 28 guests